Search found 16 matches

by Jyee81
Sep 18 2019 5:53pm
Forum: General Discussion
Topic: 48 volt 1 Watts
Replies: 11
Views: 880

Re: 48 volt 1 Watts

Thanks guys. I appreciate the patience...but here's the issue... so i bought a 48V 800W vevor bldc brushless motor, motor controller, and throttle plus ignition package deal. I am building an old pedicab and Turning to a food cart. The original motor controller had pedal assist capabilities. After i...
by Jyee81
Sep 18 2019 12:40am
Forum: General Discussion
Topic: 48 volt 1 Watts
Replies: 11
Views: 880

Re: 48 volt 1 Watts

I'm just trying to see if the motor works, if the controller is faulty if the controller works but the Motor is faulty.. I dont know why but ever since i unplugged the 3 compatible parts to relocate and clean up wiring to now include the CA-V3 DPS...nothing works. I'm connecting all wires correctly ...
by Jyee81
Sep 16 2019 11:47am
Forum: General Discussion
Topic: 48 volt 1 Watts
Replies: 11
Views: 880

Re: 48 volt 1 Watts

Well i believe i did ask what could be the problem? Sorry as stated before im not sure 0 watts is showing and this is after connecting two separate controllers to the cycle analyst via duh shunt... the green signal wire is the throttle output signal which goes into the throttle input of the controll...
by Jyee81
Sep 15 2019 1:15pm
Forum: General Discussion
Topic: 48 volt 1 Watts
Replies: 11
Views: 880

48 volt 1 Watts

CA V3 READOUT.jpg So I have a CA-V3 DPS with the additional shunt to put in line with the battery in the controller however when I turn on the cycle analyst with the throttle output going into the throttle input of a controller and all the other connections are fine I'm getting 48 volts powered on ...
by Jyee81
Sep 02 2019 11:03pm
Forum: EBike General Discussion
Topic: V3 Cycle Analyst set-up for dummies
Replies: 22
Views: 5017

Re: V3 Cycle Analyst set-up for dummies

So I have a CA-V3 DPS with the additional shunt to put in line with the battery in the controller however when I turn on the cycle analyst with the throttle output going into the throttle input of a controller and all the other connections are fine I'm getting 48 volts powered on on the cycle analys...
by Jyee81
Aug 20 2019 3:17pm
Forum: EBike Technical
Topic: Cycle analyst version 2.3 vs 3.0
Replies: 1
Views: 199

Cycle analyst version 2.3 vs 3.0

[attachment=0]Screenshot_2019-08-20-09-35-19.png[/attachment]Long story short I've made a lot of purchases via online websites that ended up not panning out for this electric Rickshaw build I'm doing my latest purchase was the cycle analyst V3 DPS I was pretty excited about it arriving and when it d...
by Jyee81
Jul 16 2019 4:03am
Forum: EBike Technical
Topic: Adding Pedal Assist option to motor controller..
Replies: 1
Views: 309

Adding Pedal Assist option to motor controller..

Can pedal assist be soldered/added to pcb? Can you splice the Pas wire into the throttle wiring coming out of the 4.3 voltage solder point on the PCB itself the reason for this question is the old controller that came with my scooter had pedal assist option I guess these new scooter / pedicabs don't...
by Jyee81
May 21 2019 5:38pm
Forum: General Discussion
Topic: Can a 48V motor controller work with 36V?
Replies: 2
Views: 637

Can a 48V motor controller work with 36V?

My Maine deep cycle batteries are delivering to much current thru thinner guaged wires...i have dc-dc step downs and a circuit breaker between batteries and motor controller however when i turn on... thinner wires are catching fire...i would upload pics but every time on a mobile device it rejects t...
by Jyee81
May 13 2019 6:49pm
Forum: General Discussion
Topic: Please can someone help with turn signal , lights , plus alarm wiring in the attached picture is my handlebar that has t
Replies: 2
Views: 624

Please can someone help with turn signal , lights , plus alarm wiring in the attached picture is my handlebar that has t

20190513_163749_HDR~2-598x555.jpg 20190513_163749_HDR~2-598x555.jpg If anyone could please help me out with the wiring of the attached picture it is my left handlebar which controls the lights the turn signal as well as the alarm/horn. I just need a general idea of how I would wire these so that th...
by Jyee81
Mar 29 2019 4:44pm
Forum: EBike Technical
Topic: Adding Pedal Assist option to motor controller...
Replies: 6
Views: 903

Re: Adding Pedal Assist option to motor controller...

Thanx for the helpful info...i greatly appreciate it...
by Jyee81
Mar 28 2019 4:50pm
Forum: EBike Technical
Topic: Adding Pedal Assist option to motor controller...
Replies: 6
Views: 903

Re: Adding Pedal Assist option to motor controller...

On the actual circuit board of a motor controller what and where is that pedal assist system soldered and what is the label on the circuit board itself for the three wired pedal assist system wires? Also can you solder and add a PAS to the circuit board that doesn't have Pas wires but a throttle? I'...
by Jyee81
Mar 28 2019 4:50pm
Forum: EBike Technical
Topic: Adding Pedal Assist option to motor controller...
Replies: 6
Views: 903

Re: Adding Pedal Assist option to motor controller...

On the actual circuit board of a motor controller what and where is that pedal assist system soldered and what is the label on the circuit board itself for the three wired pedal assist system wires? Also can you solder and add a PAS to the circuit board that doesn't have Pas wires but a throttle? I'...
by Jyee81
Mar 25 2019 12:55am
Forum: EBike Technical
Topic: Adding Pedal Assist option to motor controller...
Replies: 6
Views: 903

Re: Adding Pedal Assist option to motor controller...

Thank you for the advice...I'll definitely give that a try.
by Jyee81
Mar 24 2019 6:25pm
Forum: EBike Technical
Topic: Adding Pedal Assist option to motor controller...
Replies: 6
Views: 903

Adding Pedal Assist option to motor controller...

So I'm trying to convert this pedicab into a m mobile food cart now overtime the parts of the Speedy cab ie motor control motor batteries have just given out...they don't make the actual unit with pedal assist anymore and I've ordered 3 separate packages (throttle, controller, and brushless motor) y...
by Jyee81
Dec 06 2018 4:31am
Forum: EBike Technical
Topic: Known to Work Brushless Motor/Controller Wiring Diagrams
Replies: 140
Views: 67547

Re: Known to Work Brushless Motor/Controller Wiring Diagrams

Does anyone know the hall sensor and phase wire combo for a VEVOR Electric Motor 48V 500W DC Motor 600 RPM and a new 48V 1800W VEVOR motor controller....been stuck for months and im going crazy. Please help....