Endless Sphere

please explain what this exactly does - when i fully charge the battery i set here 100% and flash FW ? this value feeds the controller with the info that the battery is full in terms of wh ?

power mode as of now
and the power surge happens even during ride , mostly when shifting . there is no way to set controller to slowly increase current even for 2 seconds for example ?

hey .... also how to soften the start ?at full power selected when i gently move cranks (without even pushing) motor starts with power enough to make cassette loud hitting noise . it feels like it reacts only on movement and not pressure @mbrusa has probably more details on more of your settings, b...

I do not understand the question. In the latest version, setting "SOC% calculation" to "auto", the automatic reset at power on occurs when the soc% calculated with Wh consumed is different from that calculated with the voltage (over +/- 15%), it is useful when you put a battery ...

hey .is this vlcd6 only problem that wh measure and soc estimation is resetting with every display turn off ?

okay . is counting wh and soc% working ? can anyone confirm? I did some km today and 0 wh consumed

hey , thank you for help . i fixed this thing . used all four wires , SWIM GND 3.3v and RST ant this worked ! do i have to take out battery with this setup or just keep display off with battery on the bike ?

hey
i have same settings on xh18 and vlcd6 (factory displays) and xh18 is showing voltage at motor startup and vlcd6 does not ...
i'am doing something wrong ??
right display is of course selected

just realized that the display might have gone off during flashing ? Is that possible and would this cause bad flash?

okay . so with all the data provided - it there a chance to unbrick controller somehow ? if stvp can't read it ? First you said that your STlink doesn't read another tsdz2, a few post later you say it does fine. imho it looks that something is wrong with connecting several times. What exactly has h...

okay . so with all the data provided - it there a chance to unbrick controller somehow ? if stvp can't read it ?

it is 5v okay . pins are okay , they look good . tested the st-link with another bike and it reads bytes fine . im assuming that the controller causes trouble ... is this any difference that i power on the main battery and not the 5v from stlink ? and i use only GND and SWIM but i see other ppl use ...

hey . is it possible to brick tsdz2 with vlcd6 with stlink ....... It is possible to do a bad flash, but a complete brick imho isn't possible. The firmware consist of 3 files. If one of them is corrupted, you have a bad flash. Flashing again can solve this for two files with the Java configurator. ...

as of now it seems that st-link broke somehow. we tried to read memory from different motor and it failed too . seems like it broke during flash and this broke the process of flashing which resulted in faulty controller . my friend has another st-link so we will try if this one would work . I will ...

no one ?

hey
is anyone willing to post YT video of how to change things on vlcd6 ? possibly with english commentary ?
i tried to select or change mode or option but i feel too dumb for it . i mean pushing right button for right time in right sequence ...
thanks in advance

as of now it seems that st-link broke somehow. we tried to read memory from different motor and it failed too . seems like it broke during flash and this broke the process of flashing which resulted in faulty controller . my friend has another st-link so we will try if this one would work . I will r...

hey . is it possible to brick tsdz2 with vlcd6 with stlink that worked fine for few flashes but suddenly gives an error and in the same time motor stops working? display turns on but there's no read of speed and no power is sent to motor ...

I have replaced the controller on my TSDZ2 with a new one, and now it doesn't shutdown and short the battery anymore. But when I try to activate the motor using the 6km/h walk mode, the motor won't turn and I can only hear a very small buzzing from the motor. If I keep trying the walk mode for some...

it's not critical - i see many welded / repaired bikes / frames - and if not stressed terminally , they do not fail ...
so let's focus on the subject pls

https://scontent.xx.fbcdn.net/v/t39.30808-6/275931377_2167786313373220_3130246993444344731_n.jpg?stp=dst-jpg_p552x414&_nc_cat=105&ccb=1-5&_nc_sid=5bac3a&_nc_ohc=Bpo02YYgBeIAX-Vmd9m&_nc_ht=scontent.xx&edm=ADWe-ecEAAAA&oh=00_AT_x22kwQmVji1HABsALcB5ag6bEF0c2aRcIgDrJLwCnlA&a...

They are made from same metal

hey i'm looking for inspiration for welding g510 or m600 mount to marin rift zone regular bike frame . is there a forum with projects like this ? seems to me to be not very popular way of making an ebike ... but chinese frames are quite expensive and factory ebikes seem to be expensive in the long r...

Elinx wrote: ↑

Feb 23 2022 7:06pm

Elinx wrote: ↑

Feb 23 2022 11:27am

Blue gear specific

Will this work no matter which side I press from ? Is this straight tube ? Or is it coned?