Search found 35 matches

by pxl666
Jun 27 2022 3:48pm
Forum: EBike Non-hub Motor Drives
Topic: tsdz2 vlcd6 thread
Replies: 3
Views: 66

Re: tsdz2 vlcd6 thread

hey .is this vlcd6 only problem that wh measure and soc estimation is resetting with every display turn off ?
by pxl666
Jun 26 2022 2:50pm
Forum: EBike Non-hub Motor Drives
Topic: tsdz2 vlcd6 thread
Replies: 3
Views: 66

Re: tsdz2 vlcd6 thread

okay . is counting wh and soc% working ? can anyone confirm? I did some km today and 0 wh consumed
by pxl666
Jun 26 2022 7:16am
Forum: EBike Non-hub Motor Drives
Topic: bricked tsdz2 with broken stlink?
Replies: 15
Views: 246

Re: bricked tsdz2 with broken stlink?

hey , thank you for help . i fixed this thing . used all four wires , SWIM GND 3.3v and RST ant this worked ! do i have to take out battery with this setup or just keep display off with battery on the bike ?
by pxl666
Jun 26 2022 2:36am
Forum: EBike Non-hub Motor Drives
Topic: tsdz2 vlcd6 thread
Replies: 3
Views: 66

tsdz2 vlcd6 thread

hey
i have same settings on xh18 and vlcd6 (factory displays) and xh18 is showing voltage at motor startup and vlcd6 does not ...
i'am doing something wrong ??
right display is of course selected

Image
by pxl666
Jun 25 2022 12:25pm
Forum: EBike Non-hub Motor Drives
Topic: bricked tsdz2 with broken stlink?
Replies: 15
Views: 246

Re: bricked tsdz2 with broken stlink?

just realized that the display might have gone off during flashing ? Is that possible and would this cause bad flash?
by pxl666
Jun 25 2022 6:43am
Forum: EBike Non-hub Motor Drives
Topic: bricked tsdz2 with broken stlink?
Replies: 15
Views: 246

Re: bricked tsdz2 with broken stlink?

okay . so with all the data provided - it there a chance to unbrick controller somehow ? if stvp can't read it ? First you said that your STlink doesn't read another tsdz2, a few post later you say it does fine. imho it looks that something is wrong with connecting several times. What exactly has h...
by pxl666
Jun 25 2022 5:34am
Forum: EBike Non-hub Motor Drives
Topic: bricked tsdz2 with broken stlink?
Replies: 15
Views: 246

Re: bricked tsdz2 with broken stlink?

okay . so with all the data provided - it there a chance to unbrick controller somehow ? if stvp can't read it ?
by pxl666
Jun 24 2022 1:43pm
Forum: EBike Non-hub Motor Drives
Topic: bricked tsdz2 with broken stlink?
Replies: 15
Views: 246

Re: bricked tsdz2 with broken stlink?

it is 5v okay . pins are okay , they look good . tested the st-link with another bike and it reads bytes fine . im assuming that the controller causes trouble ... is this any difference that i power on the main battery and not the 5v from stlink ? and i use only GND and SWIM but i see other ppl use ...
by pxl666
Jun 24 2022 11:16am
Forum: EBike Non-hub Motor Drives
Topic: bricked tsdz2 with broken stlink?
Replies: 15
Views: 246

Re: bricked tsdz2 with broken stlink?

hey . is it possible to brick tsdz2 with vlcd6 with stlink ....... It is possible to do a bad flash, but a complete brick imho isn't possible. The firmware consist of 3 files. If one of them is corrupted, you have a bad flash. Flashing again can solve this for two files with the Java configurator. ...
by pxl666
Jun 24 2022 11:01am
Forum: EBike Non-hub Motor Drives
Topic: bricked tsdz2 with broken stlink?
Replies: 15
Views: 246

Re: bricked tsdz2 with broken stlink?

as of now it seems that st-link broke somehow. we tried to read memory from different motor and it failed too . seems like it broke during flash and this broke the process of flashing which resulted in faulty controller . my friend has another st-link so we will try if this one would work . I will ...
by pxl666
Jun 20 2022 9:17am
Forum: EBike Non-hub Motor Drives
Topic: tsdz2 OSF VLCD6 information video
Replies: 2
Views: 132

tsdz2 OSF VLCD6 information video

hey
is anyone willing to post YT video of how to change things on vlcd6 ? possibly with english commentary ?
i tried to select or change mode or option but i feel too dumb for it . i mean pushing right button for right time in right sequence ...
thanks in advance
by pxl666
Jun 19 2022 12:12pm
Forum: EBike Non-hub Motor Drives
Topic: bricked tsdz2 with broken stlink?
Replies: 15
Views: 246

Re: bricked tsdz2 with broken stlink?

as of now it seems that st-link broke somehow. we tried to read memory from different motor and it failed too . seems like it broke during flash and this broke the process of flashing which resulted in faulty controller . my friend has another st-link so we will try if this one would work . I will r...
by pxl666
Jun 18 2022 5:15pm
Forum: EBike Non-hub Motor Drives
Topic: bricked tsdz2 with broken stlink?
Replies: 15
Views: 246

bricked tsdz2 with broken stlink?

hey . is it possible to brick tsdz2 with vlcd6 with stlink that worked fine for few flashes but suddenly gives an error and in the same time motor stops working? display turns on but there's no read of speed and no power is sent to motor ...
by pxl666
May 22 2022 3:38am
Forum: EBike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 9416
Views: 1099525

Re: New "TSDZ2 Torque Sensor Central Motor"

I have replaced the controller on my TSDZ2 with a new one, and now it doesn't shutdown and short the battery anymore. But when I try to activate the motor using the 6km/h walk mode, the motor won't turn and I can only hear a very small buzzing from the motor. If I keep trying the walk mode for some...
by pxl666
Apr 17 2022 1:04pm
Forum: EBike Non-hub Motor Drives
Topic: g510 like motor to non-ebike frame
Replies: 6
Views: 329

Re: g510 like motor to non-ebike frame

it's not critical - i see many welded / repaired bikes / frames - and if not stressed terminally , they do not fail ...
so let's focus on the subject pls
by pxl666
Apr 17 2022 7:14am
Forum: EBike Non-hub Motor Drives
Topic: g510 like motor to non-ebike frame
Replies: 6
Views: 329

Re: g510 like motor to non-ebike frame

https://scontent.xx.fbcdn.net/v/t39.30808-6/275931377_2167786313373220_3130246993444344731_n.jpg?stp=dst-jpg_p552x414&_nc_cat=105&ccb=1-5&_nc_sid=5bac3a&_nc_ohc=Bpo02YYgBeIAX-Vmd9m&_nc_ht=scontent.xx&edm=ADWe-ecEAAAA&oh=00_AT_x22kwQmVji1HABsALcB5ag6bEF0c2aRcIgDrJLwCnlA&a...
by pxl666
Apr 17 2022 1:49am
Forum: EBike Non-hub Motor Drives
Topic: g510 like motor to non-ebike frame
Replies: 6
Views: 329

Re: g510 like motor to non-ebike frame

They are made from same metal
by pxl666
Apr 16 2022 3:25pm
Forum: EBike Non-hub Motor Drives
Topic: g510 like motor to non-ebike frame
Replies: 6
Views: 329

g510 like motor to non-ebike frame

hey i'm looking for inspiration for welding g510 or m600 mount to marin rift zone regular bike frame . is there a forum with projects like this ? seems to me to be not very popular way of making an ebike ... but chinese frames are quite expensive and factory ebikes seem to be expensive in the long r...
by pxl666
Feb 26 2022 3:54pm
Forum: EBike Non-hub Motor Drives
Topic: Tsdz2 broken clutch
Replies: 10
Views: 458

Re: Tsdz2 broken clutch

Elinx wrote:
Feb 23 2022 7:06pm
Elinx wrote:
Feb 23 2022 11:27am
Blue gear specific
Image
Will this work no matter which side I press from ? Is this straight tube ? Or is it coned?
by pxl666
Feb 26 2022 3:51pm
Forum: EBike Non-hub Motor Drives
Topic: Tsdz2 broken clutch
Replies: 10
Views: 458

Re: Tsdz2 broken clutch

Hillhater wrote:
Feb 23 2022 2:05pm
Are you sure tha is the problem ?
The one inside the grooved cylinder is the roller clutch for the motor,.. it only turns one way, and it does not cause the pedals to slip !
It is a simple press fit .
I was wrong. You're right
by pxl666
Feb 23 2022 2:37am
Forum: EBike Non-hub Motor Drives
Topic: Tsdz2 broken clutch
Replies: 10
Views: 458

Re: Tsdz2 broken clutch

Well... turned out to be small bearing in the blue gear. Water got inside and it rusted and stuck. Blue gear is fine but I have to replace this small bearing.

Bearing itself is simple to find but I'm not sure how to remove it from this grooved cylinder...
by pxl666
Feb 14 2022 12:33pm
Forum: EBike Non-hub Motor Drives
Topic: Tsdz2 broken clutch
Replies: 10
Views: 458

Re: Tsdz2 broken clutch

E-HP wrote:
Feb 14 2022 11:05am
pxl666 wrote:
Feb 14 2022 9:57am
Hey My motor started slipping at cranks .that was the feeling .
Does slipping mean that when you pedal, the chainring doesn't turn?
Yes . That was the feeling. Didn't try too much cos I was afraid to not to cause more damage to the motor ...
by pxl666
Feb 14 2022 9:57am
Forum: EBike Non-hub Motor Drives
Topic: Tsdz2 broken clutch
Replies: 10
Views: 458

Tsdz2 broken clutch

Hey
My motor started slipping at cranks .that was the feeling . I opened the motor and saw something that looks like broken outer ring of main clutch . I thought this was abnormal and sign of failure but a friend said that his motor looks same inside ... what do you think guys ?
by pxl666
Jan 06 2022 11:26am
Forum: EBike Non-hub Motor Drives
Topic: tsdz2 grease for torque sensor ?
Replies: 0
Views: 510

tsdz2 grease for torque sensor ?

hey
I'm curious if anyone tried to prolonge life of torque sensor coils with some lubricant ? from what i see they might rub and deteriorate over time, so maybe someone figured grease that is safe for Teflon pads and does not generate too much friction with stickiness ?