Search found 243 matches

by HrKlev
Apr 29 2021 1:30am
Forum: EBike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 8582
Views: 943153

Re: New "TSDZ2 Torque Sensor Central Motor"

Its like 5 different people experiencing the same here: https://endless-sphere.com/forums/viewtopic.php?t=98361 . It is all extended axles, so I think the problem is worse on those, but the design is still pretty much the same on the 68mm version. Enduro bikes usually have wider BB than the old 68m...
by HrKlev
Apr 28 2021 2:11pm
Forum: EBike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 8582
Views: 943153

Re: New "TSDZ2 Torque Sensor Central Motor"

I'm all up for criticism in its place, but this motor in my view is being unfairly rated at times by posters who are using it in ways it was never intended by the designers and then dissing it because their one example broke for example the crank. Its like 5 different people experiencing the same h...
by HrKlev
Apr 28 2021 10:47am
Forum: EBike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 8582
Views: 943153

Re: New "TSDZ2 Torque Sensor Central Motor"

Mmmmm what is it with forums and threads where one bad experience written in such terms as above can influence how it’s presumed all operators will experience the same thing. Sorry we do hard XCountry riding that probably to most would be Enduro style riding but just without jumps, and yet to bend ...
by HrKlev
Apr 28 2021 1:42am
Forum: EBike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 8582
Views: 943153

Re: New "TSDZ2 Torque Sensor Central Motor"

Hi. The TSDZ2 with torque sensor looks OK. But... What can I expect if I mount it on enduro MTB ? Will it take the hill climbing? I am down to put some effort into the climb. I am just looking for some assistance. Thank you for your feedback. If you are doing enduro on your enduro bike, its not the...
by HrKlev
Apr 26 2021 3:23pm
Forum: EBike Technical
Topic: Bafang G310 geared hub - 11:1 reduction ratio!!!
Replies: 237
Views: 43864

Re: Bafang G310 geared hub - 11:1 reduction ratio!!!

Standard wind on 36v will do about 29kmh in a 20" and about 33kmh in a 24" according to the Grin motor simulator, so no need for the fast wind. A baserunner, cycle analyst and a bottom bracket torque sensor would give you what you want (you can use whatever controller you want with the cyc...
by HrKlev
Apr 22 2021 3:07pm
Forum: EBike Build Threads
Topic: Claude Butler Hardtail / DIY Hoverboard Mid Drive ...
Replies: 4
Views: 198

Re: Claude Butler Hardtail / DIY Hoverboard Mid Drive ...

Very interesting project! Whats the weight of one of those motors?
by HrKlev
Apr 21 2021 4:21pm
Forum: EBike Build Threads
Topic: My attempt at lightweight, torque based EMTB
Replies: 48
Views: 4809

Re: My attempt at lightweight, torque based EMTB

So, not too impressed with the Bafang G370 motor right now. Nylon gears gave up after a few trips. I did have some violent juddering before I got to tune it out, but still.... Running at 35A phase amps, which should translate into 43NM according to phase suite., which is less than what the Aikema mo...
by HrKlev
Apr 21 2021 4:55am
Forum: Motor Technology
Topic: Oil cooling a motor with transformer oil/dielectric fluid - the next frontier?
Replies: 69
Views: 2505

Re: Oil cooling a motor with transformer oil/dielectric fluid - the next frontier?

If I can get tune the printed nylon gears for my g370 to work decently, I would have no problem with testing this. Getting any kind of transformer in my country in a smaller amount than 200 liter is difficult, though. Is there anywhere I can buy this in small amount online?
by HrKlev
Apr 19 2021 1:37am
Forum: EBike Technical
Topic: Bafang G310 geared hub - 11:1 reduction ratio!!!
Replies: 237
Views: 43864

Re: Bafang G310 geared hub - 11:1 reduction ratio!!!

Sure :) Does this work, or does it just lead to my login or something else? The shop is called "46 Ebike Store". They also has the motors, so nice to have stored (g310, g311, g370) https://a.aliexpress.com/_mK6e4jp https://a.aliexpress.com/_mKETMxD Update: G370 gears are different to both ...
by HrKlev
Apr 19 2021 12:31am
Forum: EBike Technical
Topic: Bafang G310 geared hub - 11:1 reduction ratio!!!
Replies: 237
Views: 43864

Re: Bafang G310 geared hub - 11:1 reduction ratio!!!

Could it use the same gears as G310/311? Those seem to be the same 18-33 gears for both motors and available at least on Aliexpress. Thanks! Found the shop on aliexpress. They had measurements for the gears, and turns out tve G310 and G311 uses very different gears. I will have to open up and measu...
by HrKlev
Apr 18 2021 1:39am
Forum: EBike Technical
Topic: Bafang G310 geared hub - 11:1 reduction ratio!!!
Replies: 237
Views: 43864

Re: Bafang G310 geared hub - 11:1 reduction ratio!!!

OR.. maybe bathing the gears in that oil actually improves efficiency. Have you ever seen how thin a coating a geared motor has after lots of miles, and most of the lithium grease has been flung off to the sides? Perhaps we're being pessimistic! When I filled the Aikema motor with ATF I noticed the...
by HrKlev
Apr 16 2021 1:08pm
Forum: EBike Technical
Topic: Bafang G310 geared hub - 11:1 reduction ratio!!!
Replies: 237
Views: 43864

Re: Bafang G310 geared hub - 11:1 reduction ratio!!!

Just curious, has anyone experienced that ATF has done any harm, and what type if ATF? Im only 8-9 months into the experiment myself, so I dont have the answer yet, but so far I have yet to see any ill effects. I didnt do any other research than "take whatever was on the shelf because I want to...
by HrKlev
Apr 16 2021 12:53am
Forum: EBike Technical
Topic: Bafang G310 geared hub - 11:1 reduction ratio!!!
Replies: 237
Views: 43864

Re: Bafang G310 geared hub - 11:1 reduction ratio!!!

Definitely do it... The oil part. Don't worry about the encapsulation. If you’re so smart, how come yer not rich? Seriously entertaining to read one of us imagines they’re smarter than Justin Elmore. Why reinvent the wheel. (Statoraide) Except that statorade wont do anything in an inrunner like thi...
by HrKlev
Apr 15 2021 3:48am
Forum: EBike Build Threads
Topic: Titanium Fatbike - Bafang Ultra and Phaserunner
Replies: 57
Views: 16752

Re: Titanium Fatbike - Bafang Ultra and Phaserunner

Nice build! You should try out the electronic freewheel feature in the paserunner suite. It keeps the motor engaged all the time and the responce and smoothness is awesome. Its sort of what you did with the throttle, but it is not active when the motor is stalled. Also much more adjustable (you shou...
by HrKlev
Apr 15 2021 3:35am
Forum: Battery Technology
Topic: ANT BMS Why lost bluetooth signal and how restart?
Replies: 2
Views: 174

Re: ANT BMS Why lost bluetooth signal and how restart?

I have several builds running these, and to be able to switch between them it is a bit of a hassle. I need to move the one I want to check away from the others, then delete the bluetooth connection on the phone menu. Then rediscover it, and last connect in the app. Might take a couple tries sometime...
by HrKlev
Apr 14 2021 4:18am
Forum: EBike Reviews & Testing
Topic: Cycle Analyst V3 preview and first beta release
Replies: 4634
Views: 890422

Re: Cycle Analyst V3 preview and first beta release

Thanks!

Support for 36 poles, wohoo! :mrgreen:
by HrKlev
Apr 13 2021 4:00pm
Forum: EBike Reviews & Testing
Topic: Cycle Analyst V3 preview and first beta release
Replies: 4634
Views: 890422

Re: Cycle Analyst V3 preview and first beta release

What is the news in this 3.15b version? I cant find release notes anywhere.
by HrKlev
Apr 10 2021 11:33am
Forum: EBike Non-hub Motor Drives
Topic: Off Road Battery Size recommendation for BBSHD
Replies: 13
Views: 651

Re: Off Road Battery Size recommendation for BBSHD

Having the weight on your body (backpack) is very different from having it mounted to the bike, in a good way. Its a PITA to always remember the backpack, and having the battery cables hanging around, though. Its your build, but I would reccomend that you keep the options open to mount it back into ...
by HrKlev
Apr 09 2021 2:26pm
Forum: EBike Non-hub Motor Drives
Topic: Off Road Battery Size recommendation for BBSHD
Replies: 13
Views: 651

Re: Off Road Battery Size recommendation for BBSHD

Just wondering, why would you want to mount the battery at the highest possible place? Doesnt sound like the best location for the type of riding you do. Why not in the frame triangle?
by HrKlev
Apr 08 2021 2:34pm
Forum: EBike Build Threads
Topic: Santa Cruz Cham-E-leon (mk7) - Mid Drive Conversion
Replies: 21
Views: 821

Re: Santa Cruz Cham-E-leon (mk7) - Mid Drive Conversion

Sounds like the tsdz2 should do you well for that kind of use. I would try to make it fit with the 68-73mm axle anyway. I would think that you can just remove the material that is needed and if you grind through, just patch up with silicone or something. Its just a big metal gear behind there, and i...
by HrKlev
Apr 08 2021 11:30am
Forum: EBike Non-hub Motor Drives
Topic: New "TSDZ2 Torque Sensor Central Motor"
Replies: 8582
Views: 943153

Re: New "TSDZ2 Torque Sensor Central Motor"

Wouldnt it be easier to use a KT controller with osf? I think they are supposed to support torque sensors...?
by HrKlev
Apr 08 2021 1:42am
Forum: EBike Build Threads
Topic: Santa Cruz Cham-E-leon (mk7) - Mid Drive Conversion
Replies: 21
Views: 821

Re: Santa Cruz Cham-E-leon (mk7) - Mid Drive Conversion

Yeesh... that is exactly what I have been concerned about since I ordered this. I've had this nagging feeling that because of this axle issue, I would have been better off with a bbs02. The thing is I am a rabid cyclist, and I just couldn't bring myself to jumping into the pedaling for show riding ...
by HrKlev
Apr 07 2021 1:44am
Forum: EBike Build Threads
Topic: Santa Cruz Cham-E-leon (mk7) - Mid Drive Conversion
Replies: 21
Views: 821

Re: Santa Cruz Cham-E-leon (mk7) - Mid Drive Conversion

Nice bike! If you plan to do offroad with this bike, and pedal hard, I would suggest you do everything you can to use the 68-73mm axle. The groove for the locking ring on the 100mm axles (well, at least the two I got) are macined deeper than the original axles. Making a really weak design even worse...
by HrKlev
Apr 01 2021 2:58pm
Forum: EScooter/EMotorcycle Build Threads
Topic: Yamaha YZF250F
Replies: 127
Views: 6981

Re: Yamaha YZF250F

Looking nice! Are these the same kind that you used on the other bike, just a newer version? Do you know the weight, or even more interesting kwh/kg and kw/kg?
by HrKlev
Mar 24 2021 1:24pm
Forum: EBike General Discussion
Topic: DIY Bottom Bracket Torque Sensor?
Replies: 11
Views: 481

Re: DIY Bottom Bracket Torque Sensor?

One way to fix that would be to create the system in a way that assists less at the lower speeds so that the curve of assist vs human input remains the same across the speed range from zero to max. I don't know how to do that, but it should be possible. Yes... but.... thats what the cadence sensor ...