Please can someone help with turn signal , lights , plus alarm wiring in the attached picture is my handlebar that has t

Talk about anything and everything here within reason.
Post Reply
Jyee81   1 mW

1 mW
Posts: 16
Joined: Dec 06 2018 4:15am

Please can someone help with turn signal , lights , plus alarm wiring in the attached picture is my handlebar that has t

Post by Jyee81 » May 13 2019 6:49pm

20190513_163749_HDR~2-598x555.jpg
Wiring guidance...
20190513_163749_HDR~2-598x555.jpg (206.71 KiB) Viewed 272 times
20190513_163749_HDR~2-598x555.jpg
Wiring guidance...
20190513_163749_HDR~2-598x555.jpg (206.71 KiB) Viewed 272 times
If anyone could please help me out with the wiring of the attached picture it is my left handlebar which controls the lights the turn signal as well as the alarm/horn. I just need a general idea of how I would wire these so that they would work they are different components from different companies i.e. the old handlebar for the old bike however I got new headlights and I got new rear lights/turn signals & and new alarm/horn...so I just need a general idea of how the signal wiring goes; the positive & negative is obvious , the other five wires coming out of the handlebar I can't remember what they went to . I DO know that the green button was the horn as well as the alarm activation when it was off there's the turn signals and the lights switch so please if anyone has a general idea of what they may lead to I'd greatly appreciate it it's better than where I'm at right now God bless
20190513_163749_HDR~2-598x555.jpg
Wiring guidance...
20190513_163749_HDR~2-598x555.jpg (206.71 KiB) Viewed 272 times
Attachments
20190513_163749_HDR~2-598x555.jpg
20190513_163749_HDR~2-598x555.jpg (206.71 KiB) Viewed 269 times
Last edited by Jyee81 on Sep 11 2019 12:27pm, edited 2 times in total.


User avatar
amberwolf   100 GW

100 GW
Posts: 32238
Joined: Aug 17 2009 6:43am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group
Contact:

Re: Please can someone help with turn signal , lights , plus alarm wiring in the attached picture is my handlebar that h

Post by amberwolf » May 13 2019 11:11pm

I dont' see any image in either post. Try using the Attachments tab, then Add Files, and browse to the image on your computer.


But for a general way to wire things, you might look at Teklektik's great thread on the subject:
viewtopic.php?f=2&t=75171
Even though he's probably using different stuff than yours, you can take the general idea to figure yours out.

There are other threads too:
search.php?keywords=turn+signal*&terms= ... mit=Search

Post Reply