Stancraft67
1 µW
- Joined
- Jan 24, 2022
- Messages
- 1
Hi all I have aktm duke 200 that I have fitted a qs 17x6 12kw hub motor with a kelly kls96601-8080h controller with a 400 amp contactor problem i
Have wired it up as pet kelly wiring diagram for klsh controllers but the contactor won't close it appears that the ground pin 6 is not working as if I connect the contactor directly to battery it will work the capacitors in controller are charging up and are at 109 volts ( the precharge resister is working) when I switch the forward switch and turn throttle the wheel does not move any help would be appreciated
Cheers stan
Have wired it up as pet kelly wiring diagram for klsh controllers but the contactor won't close it appears that the ground pin 6 is not working as if I connect the contactor directly to battery it will work the capacitors in controller are charging up and are at 109 volts ( the precharge resister is working) when I switch the forward switch and turn throttle the wheel does not move any help would be appreciated
Cheers stan