hammerstrumm
100 µW
- Joined
- Apr 5, 2019
- Messages
- 9
Hi, my kelly display no longer works, I want to open it to see if i can fix it, but I can not see what tool to use.(small hole is very deep and dark).
I think the problem is the display, because it used to get "water" -humidity- condensation inside it with weather-temperature changes.
But i have no idea how to check where the problem is if it is not the display itself.
I parked the bike after a short ride and forgot to switch it off for a couple of hours.It still had 3/4 charge .
The bike is still running ok. (Vector Typhoon 4t, ).But i need the display to see charge etc.
The bike is from late 2018.
Much obliged for a tip on what tool to open it with.
EDIT
Judging from the philips mini screws the switch is fitted with, it should be the same screws.Incredibly tight though...
it is this one, https://www.dundrive.com/electric-bicycle-display-tft-750c-48v-60v-72v-speedometer-with-pas-function-for-sabvoton-controller-p3628237.html?currency=EUR
was hard to find but now I wonder ,if I install this one out of box, would it work?Because it mentions only Sabvotron controller and I have a Kelly. 7230S.
I checked the power and the switch gets power so pretty sure the display itself is the problem.
PS I am new at this forum, if I posted this in the wrong topic I apologize.
I think the problem is the display, because it used to get "water" -humidity- condensation inside it with weather-temperature changes.
But i have no idea how to check where the problem is if it is not the display itself.
I parked the bike after a short ride and forgot to switch it off for a couple of hours.It still had 3/4 charge .
The bike is still running ok. (Vector Typhoon 4t, ).But i need the display to see charge etc.
The bike is from late 2018.
Much obliged for a tip on what tool to open it with.
EDIT
Judging from the philips mini screws the switch is fitted with, it should be the same screws.Incredibly tight though...
it is this one, https://www.dundrive.com/electric-bicycle-display-tft-750c-48v-60v-72v-speedometer-with-pas-function-for-sabvoton-controller-p3628237.html?currency=EUR
was hard to find but now I wonder ,if I install this one out of box, would it work?Because it mentions only Sabvotron controller and I have a Kelly. 7230S.
I checked the power and the switch gets power so pretty sure the display itself is the problem.
PS I am new at this forum, if I posted this in the wrong topic I apologize.