Onecaribou
10 µW
- Joined
- Oct 16, 2012
- Messages
- 6
Hi All,
I'm attempting to convert my Ryobi RY14110 48v SLA mower to Lipo. The stock mower runs off 2-24v 10Ah Lead acid batteries and though the SLA pack sags terribly, the mower is in working condition. Unfortunately, I'm having trouble figuring out why the mower won't start.
I've gone ahead and purchased two Turnigy nano-tech 5000mah 6S high discharge batteries and wired them in as shown below. I've checked my wiring and the fuses and all appear to be OK.
I'm hoping someone could point me in the right direction before I tear the mower down and trace it with a voltmeter.
Conversion:
Original Wiring:
For what it's worth I have checked out some similar conversion threads for the same model but they have't shed much light on the issue.
https://www.endless-sphere.com/forums/viewtopic.php?f=1&t=52108&p=792645
https://www.endless-sphere.com/forums/viewtopic.php?f=14&t=53275&p=794083#p794083
http://endless-sphere.com/forums/viewtopic.php?f=1&t=37250
I intend to put a couple voltage monitors and add another two packs in parallel once I get the current configuration working.
Thanks!
I'm attempting to convert my Ryobi RY14110 48v SLA mower to Lipo. The stock mower runs off 2-24v 10Ah Lead acid batteries and though the SLA pack sags terribly, the mower is in working condition. Unfortunately, I'm having trouble figuring out why the mower won't start.
I've gone ahead and purchased two Turnigy nano-tech 5000mah 6S high discharge batteries and wired them in as shown below. I've checked my wiring and the fuses and all appear to be OK.
I'm hoping someone could point me in the right direction before I tear the mower down and trace it with a voltmeter.
Conversion:
Original Wiring:
For what it's worth I have checked out some similar conversion threads for the same model but they have't shed much light on the issue.
https://www.endless-sphere.com/forums/viewtopic.php?f=1&t=52108&p=792645
https://www.endless-sphere.com/forums/viewtopic.php?f=14&t=53275&p=794083#p794083
http://endless-sphere.com/forums/viewtopic.php?f=1&t=37250
I intend to put a couple voltage monitors and add another two packs in parallel once I get the current configuration working.
Thanks!