Lost_Potato
1 µW
- Joined
- Apr 4, 2022
- Messages
- 1
I am planning on building a bike, I would like to have an onboard charger with a j1772 plug.
The battery pack I'm planning on building is a 72v 20s30p pack of around 5.6KWh.With a 400amp ANT bms. The cells
(https://liionwholesale.com/products...0-15a-flat-top-2600mah?variant=39353214468165) are rated at 2C, but the charging method on the cell spec sheet says .5c,4.2v with a .05c cutoff, so I'm not quite sure what that means for what I should do for a charger.
So I'm looking for an AC-DC ¿converter? ¿Inverter? That can take 110-240vAC and output 84vDC at ---amps?
Anyone have any ideas/help?
The battery pack I'm planning on building is a 72v 20s30p pack of around 5.6KWh.With a 400amp ANT bms. The cells
(https://liionwholesale.com/products...0-15a-flat-top-2600mah?variant=39353214468165) are rated at 2C, but the charging method on the cell spec sheet says .5c,4.2v with a .05c cutoff, so I'm not quite sure what that means for what I should do for a charger.
So I'm looking for an AC-DC ¿converter? ¿Inverter? That can take 110-240vAC and output 84vDC at ---amps?
Anyone have any ideas/help?