60 volt controller wiring help

Joined
Aug 3, 2022
Messages
1
I'm new here so I not sure if I'm posting in the right area sorry if its
wrong
I have a Fieabor electric controller went bad I purchased two 60v
35 amp 3000 watt controller's one for front hub controller "A" one for
controller "B" Alibaba sent me two 45 amp controller's 60volt "A" & "B"
alibaba refused to exchange or give refund I'm wanting to know if 45amp
controller's are yhey compatable to fit my scooter is
5600 watt 60volt each hub is 2800 watt so I'm sure it can handle 45amp
controller's I went to install new controller and some wires diffrent
colors and some connections not same I have a 6 pin new 45amp controller's
no 6 pin I put labels on my scooter wires but new controllers no labels and
no wiring schematic/diagram no wire's marked do you know where to get a
wiring diagram or schematic looked online no luck looked everywhere it's a.
J&P 60volt 45amp 3000 watt controller "A" & "B" these are part # on new
controllers
JP-CCTKB638-742Y20201028
Controller "B"
JP-CCTKB638-742Y20201031
Controller "A" my email is lion0000pn@gmail.com thanks for any help you can give
 
Back
Top