I have a small Schwinn Stingray kick scooter that I have converted into an electric scooter. It has a direct drive hub motor since it doesn't have a belt or chain. I hooked everything up no problem, until I connected the self-learning wires. First I had the brakes hooked up when plugging that up. When I unplugged it and tried the throttle, the wheel didn't turn. So, I unplugged the brakes and plugged the self-learning wires together again and let it run. Now the throttle works perfect. But once I plugged the brakes back in, now they don't work. What am I missing? I am super frustrated; you get one thing working correctly and something else takes you back 20 steps. Thanks for any assistance. Here is some pics before the hub motor and controller and such.