Hello community,
Here is my way off retrofiting an E-RS2 matrix
Here is some picture of the build
The project is about converting an rs2 matrix frame on a swingarm drag bike
motor: QS138-90H
Controler: ND96850
BATTERY: 3 x 24s KOKAM 15aH
Each all parts restored, joints, bearing , screws etc..
LETS THE BUILD TURNING IN
Here is my way off retrofiting an E-RS2 matrix
Here is some picture of the build
The project is about converting an rs2 matrix frame on a swingarm drag bike
motor: QS138-90H
Controler: ND96850
BATTERY: 3 x 24s KOKAM 15aH
Each all parts restored, joints, bearing , screws etc..
LETS THE BUILD TURNING IN