If you want to make and sell wiring harnesses for scooters, you would need to actually trace out the existing wiring on each of those scooters, and build matching wiring harnesses with matching connectors. There aren't wiring diagrams, etc., available for any of these, unless you make them yourself. If you don't have access to the scooters to do this, you would probably have to buy one of each in order to do it.
If you want to make wiring harnesses that allow installation of different controllers than the originals, you'd need to still do the first part above, and then also get the wiring diagram for each different controller brand and model you want to use, from the controller manufacturers (the sellers rarely have useful information), and then determine which parts of those wiring diagrams match the ones you make yourself for each scooter. Any parts that don't match, you would have to figure out if those are necessary functions, or not, and if they're necessary, you'd have to add wiring and connectors to the harnesses to match those, going to whatever other parts you have to add to the scooters to make those functions work.
What functions each controller has you would have to find out from the manufacturer of each controller, if you can't get that information from the places you buy them from, and it isn't in the manuals for them.
Similarly, to find out the functions of each thing on the scooters, you'd either have to determine yourself by tracing the wiring out and testing each function, or get that information from each scooter manufacturer, if it isn't available from the sellers and isn't in the manuals for them.
There are threads here on the forum that you can look for and read for various controller models that may have some wiring and function info, including each of the Votol controllers you reference. Similarly there are threads for scooters of various models that members here have modified that might have some information about them, but none of them I've seen has wiring harness diagrams or other info you would need to make your own to sell from.
rogerI0 said:
Hmmm, the electric installation isn't for me. I'm just trying to make one. I've seen the electric installation of electric scooters like Águila,AVA model Puma, Rali and some other models commercialized in Cuba, but so far I haven't been able to take a closer look to wiring. I would like to make the wiring for a controller Votol EM 50/100/150 ( one of the most commercialized controllers in Cuba). And yes I'm trying to learn how to make the wiring in order to sell them, I need to money[emoji28]. So far I haven't been able to find much about the wiring of electric scooters in the internet (google) so I'm trying to learn here.
rogerI0 said:
I think that i could resume it in the fact that I'm trying to make the wiring for scooters like Águila,AVA models Puma and Alcon,Rali,Mishozuki (scooters commercialized in Cuba).
rogerI0 said:
Wright now i just want the basics functions, I don't know all the functions, if u could tell me basics or all of the functions.