electricboard1
100 µW
- Joined
- Nov 17, 2010
- Messages
- 9
I have a 36v electric scooter/board being powered with two 18v makita 6ah tool batteries. (Wired in series to make 36v)
I know these individual batteries have a built in bms safety feature which will cut the power from the tool if the battery is running low on power or getting flat.
But as I have wired these two batteries together in series I need to know if the bms in each battery pack would still work as it is now working at 36v ??
Would these batteries still cut out when the voltage gets too low?
Or by wiring both battery packs together does this somehow bypass the internal bms battery cutout feature when being used at 36v?
I know these individual batteries have a built in bms safety feature which will cut the power from the tool if the battery is running low on power or getting flat.
But as I have wired these two batteries together in series I need to know if the bms in each battery pack would still work as it is now working at 36v ??
Would these batteries still cut out when the voltage gets too low?
Or by wiring both battery packs together does this somehow bypass the internal bms battery cutout feature when being used at 36v?