Does this BMS have balance resistors?

rg12

100 kW
Joined
Jul 26, 2014
Messages
1,584
Am looking for a tiny 9S BMS and found only this one:
https://www.aliexpress.com/item/400...xp_id=6717017e-56e1-4a7d-8431-c820a6782746-15

Some mention that this version of 25A (the small one which is what I need) has no balance and I have found before one or two that mentioned that there IS a balance function but it's the exact same photo and my trust in china is not too great.

So, by the photo of the board, do you think these channels with the smd resistors at the end (close to the balance connector) may be balance resistors?
 
All the pictures of that products looks like they have resistors balancing system, but it is hard to tell which model are each picture.
But in the characteristics it says that the 25A model does NOT have that function.
 
For sure the one in the picture has balancing resistors. The spec page states 50mA balancing current.
 
Back
Top