10s BMS to JST adapters

Batteries, Chargers, and Battery Management Systems.
Post Reply
xmuf   1 mW

1 mW
Posts: 10
Joined: Apr 25 2021 5:32am

10s BMS to JST adapters

Post by xmuf » Jun 13 2021 12:55am

pic 1) daly BMS has 11 wires and the JST’s have 6, is this correct?. bottom Lipo is main negative and top is main positive, two 5s Lipos

pic 2) the BMS wires will be soldered to a JST adapter first. would it be safer to heat shrink the excess wire or remove the pin, assuming the first diagram is correct
Attachments
Screen Shot 2021-06-13 at 12.27.31 pm.png
Screen Shot 2021-06-13 at 12.27.31 pm.png (45.6 KiB) Viewed 101 times
Screen Shot 2021-06-13 at 12.49.25 pm.png
Screen Shot 2021-06-13 at 12.49.25 pm.png (39.79 KiB) Viewed 101 times

Post Reply