13s10p battery pack repair (PART 2). Help much appreciated!

Joined
Aug 13, 2021
Messages
16
I have two 13s10p battery packs,

First one had 7 parallel groups that measured 0v, the remaining three were at 3,9v. I have removed these 30 cells (individually).

The second one measured as follow:

0.0v, 0.0v, 0.0v, 3.5v, 1.7v,
2.9v, 3.7v, 2.6v, 3.5v, 0.6v

Therefore my plan is to completely disassemble also the second battery and go with a smaller and simpler 13s6p configuration, similar to the example in this video: (Screenshot attached below, no need to click)
https://www.youtube.com/watch?v=wdZ_Ca_sAZE (1:31)


I will use 0,15mm pure nickel strip which should be enough to draw 30a continuously, at least if I understand this correctly?

Anything wrong with my plan? Any tips, ideas/advice is very much appreciated!



(If you want more info, check out my last post: https://endless-sphere.com/forums/viewtopic.php?f=35&t=116291)
 

Attachments

  • Screenshot_2022-06-11-14-43-10-282_com.google.android.youtube.jpg
    Screenshot_2022-06-11-14-43-10-282_com.google.android.youtube.jpg
    236.1 KB · Views: 259
Back
Top