xt60 on commercial battery?

E-driver_

1 kW
Joined
May 22, 2022
Messages
356
Hi

So I am thinking about putting an xt-60 on a battery that is commercial so I can use it on all other bikes as well.

When I opened the battery I was a bit confused from the fact that along with the big black and big red cable there was a few small ones going to the circuit board cards.

Now are these important to wire to the xt60 as well? Or are they unnecessary?

I am not sure because I haven't been messing around with this before.

Looks kind of like this:
 

Attachments

  • Skärmavbild 2022-06-22 kl. 22.31.44.png
    Skärmavbild 2022-06-22 kl. 22.31.44.png
    933.8 KB · Views: 264
  • Skärmavbild 2022-06-22 kl. 22.31.37.png
    Skärmavbild 2022-06-22 kl. 22.31.37.png
    1.6 MB · Views: 264
  • Skärmavbild 2022-06-22 kl. 22.31.21.png
    Skärmavbild 2022-06-22 kl. 22.31.21.png
    1.7 MB · Views: 264
  • Skärmavbild 2022-06-22 kl. 22.31.14.png
    Skärmavbild 2022-06-22 kl. 22.31.14.png
    932.2 KB · Views: 264
  • Skärmavbild 2022-06-22 kl. 22.31.06.png
    Skärmavbild 2022-06-22 kl. 22.31.06.png
    2 MB · Views: 264
  • Skärmavbild 2022-06-22 kl. 22.30.59.png
    Skärmavbild 2022-06-22 kl. 22.30.59.png
    1.1 MB · Views: 264
  • Skärmavbild 2022-06-22 kl. 22.30.50.png
    Skärmavbild 2022-06-22 kl. 22.30.50.png
    949.3 KB · Views: 264
  • Skärmavbild 2022-06-22 kl. 22.30.41.png
    Skärmavbild 2022-06-22 kl. 22.30.41.png
    1.4 MB · Views: 264
Back
Top