Junsi 4010 Duo as electronic load max voltage

dominik h

10 kW
Joined
Jul 24, 2021
Messages
667
Location
Germany
I want to use my Junsi as an adjustable electronic load.

I have got a 1Ohm 1kW resistor but need it adjustable to test a 48V power supply at home.
Junsi manual says max 40V discharge.
But if I discharge a fully charged 10S HV Lipo then they are at 43V. Does anyone know if 48V is also possible?
Who has tried this already?
 
Back
Top