Kingfish
100 MW
Greetings –
I just need a sanity check as I wire up my new Meanwells to create an 84V 13A charger.
Thanks, KF
I just need a sanity check as I wire up my new Meanwells to create an 84V 13A charger.
- VAC comes in on the right.
- Meanwell SP-320-48 Qty-2 in parallel
- Meanwell S-350-27 in series, taking the +V from the 320s and routing it to the –V of the 350
- Use the +V from the 350 and the GND to charge the battery array via the BMS.
- The –V from the 350 would essentially not be used.
- 320-48s are trimmed to +54V, and the 350-27 is trimmed to +30V.
Thanks, KF