cybercrash
1 mW
- Joined
- Jan 21, 2014
- Messages
- 19
Hi there,
I ordered the BC168 balance charger, which some of you guys use with great success, to get the fastest and best balanced lipos I can get. (Used the imax before but I didn't like it charging and then balancing such a long time unable to charge all the cells equally.)
I ordered this charger:
http://www.rcecho.com/BC168-RC-Mode...olymer-Li-Fe-Hobby-Balance-Charger-BC016.html
But then I found this one:
http://www.rcecho.com/RadioLink-Model-CB86-R-C-Hobby-Professional-Li-Po-Balance-Charger-BC080.html
Manual:
http://www.radiolink.com.cn/doce/product-detail-102.html
This one seems to charge through the balance plug like the BC168. But connecting up to 8 lipos isn't a problem.
The charger can charge one batterys one after another or all in parallel.
This way you can connect all your batteries at once, lay back and wait until the charger is finished.
It's just that I don't know what to make of the data sheets:
BC168 vs CB86
8A 6A (but seems to stay cool all the time at 97% efficiancy)
0,001V 0,01V charging precision
150mAh 70mAh charger power usage
lcd LCD 192 x 64 resolution
(bc168 discription: http://www.ebay.de/itm/AOK-BC168-1-6...-/150735495200)
Which seems better?
What do you guys think about that?
Would you recommend me getting the CB86 over the BC168?
I ordered the BC168 balance charger, which some of you guys use with great success, to get the fastest and best balanced lipos I can get. (Used the imax before but I didn't like it charging and then balancing such a long time unable to charge all the cells equally.)
I ordered this charger:
http://www.rcecho.com/BC168-RC-Mode...olymer-Li-Fe-Hobby-Balance-Charger-BC016.html
But then I found this one:
http://www.rcecho.com/RadioLink-Model-CB86-R-C-Hobby-Professional-Li-Po-Balance-Charger-BC080.html
Manual:
http://www.radiolink.com.cn/doce/product-detail-102.html
This one seems to charge through the balance plug like the BC168. But connecting up to 8 lipos isn't a problem.
The charger can charge one batterys one after another or all in parallel.
This way you can connect all your batteries at once, lay back and wait until the charger is finished.
It's just that I don't know what to make of the data sheets:
BC168 vs CB86
8A 6A (but seems to stay cool all the time at 97% efficiancy)
0,001V 0,01V charging precision
150mAh 70mAh charger power usage
lcd LCD 192 x 64 resolution
(bc168 discription: http://www.ebay.de/itm/AOK-BC168-1-6...-/150735495200)
Which seems better?
What do you guys think about that?
Would you recommend me getting the CB86 over the BC168?