So I was hoping that someone could clear up some confusion on my end...
So I've got a controller that will draw max 30A... I was thinking of experimenting with hooking up two lipo batteries in series (6S, 10C, 5200mAh, 22.4v but hooked in series)
http://www.hobbyking.com/hobbyking/store/__56841__Multistar_High_Capacity_6S_5200mAh_Multi_Rotor_Lipo_Pack.html
But i noticed the wire coming out of the lipo battery is only 14AWG. Yet according to this, this battery has a 52A continuous discharge, right?
https://www.commonsenserc.com/page.php?page=c_ratings_explained.html
So why would this only have 14AWG wire coming out of the battery? Isn't 14AWG rated at like 15A?
Chris
So I've got a controller that will draw max 30A... I was thinking of experimenting with hooking up two lipo batteries in series (6S, 10C, 5200mAh, 22.4v but hooked in series)
http://www.hobbyking.com/hobbyking/store/__56841__Multistar_High_Capacity_6S_5200mAh_Multi_Rotor_Lipo_Pack.html
But i noticed the wire coming out of the lipo battery is only 14AWG. Yet according to this, this battery has a 52A continuous discharge, right?
https://www.commonsenserc.com/page.php?page=c_ratings_explained.html
So why would this only have 14AWG wire coming out of the battery? Isn't 14AWG rated at like 15A?
Chris