Looking for examples of connection methods when DIY bank assembling,
that do not involve directly applying heat to the batteries themselves.
Here is one example to start:
https://www.ebay.com/itm/Brand-New-6-A123-3-2V-18650-1100mAh-Lifepo4-Rechargeable-Battery-30A-w-Tab/303075753365
Personally only interested in LFP, but welcome examples using other chemistries - if possible please state the specific chemistry of other examples.
Battery holder examples are most welcome, DIY designs or OTS products, or a mix, whatever,
but must be secure in a mobile context, both due to high vibration/shock, and potentially high current rates.
that do not involve directly applying heat to the batteries themselves.
Here is one example to start:
https://www.ebay.com/itm/Brand-New-6-A123-3-2V-18650-1100mAh-Lifepo4-Rechargeable-Battery-30A-w-Tab/303075753365
Personally only interested in LFP, but welcome examples using other chemistries - if possible please state the specific chemistry of other examples.
Battery holder examples are most welcome, DIY designs or OTS products, or a mix, whatever,
but must be secure in a mobile context, both due to high vibration/shock, and potentially high current rates.