Motor PICTURE links, disassembled, hub and non-hub

spinningmagnets

Moderator
Staff member
Joined
Dec 21, 2007
Messages
12,952
Location
Ft Riley, NE Kansas
HUB MOTORS

_____________________________________________________
"Brushless GEARED hub motors, big list and details"
https://endless-sphere.com/forums/viewtopic.php?f=3&t=4892

_____________________________________________________

"MAC hall replacement, lotsa pics"
https://endless-sphere.com/forums/viewtopic.php?f=2&t=63771
_____________________________________________________

"Hacking a couple Stromer ST1's"
https://endless-sphere.com/forums/viewtopic.php?f=6&t=63809&p=958171#p957836

A2B (almost identical to Stromer, likely the same motor design)
https://endless-sphere.com/forums/viewtopic.php?f=6&t=43482
https://endless-sphere.com/forums/viewtopic.php?f=2&t=30050
https://endless-sphere.com/forums/viewtopic.php?f=10&t=20102#p297840

BionX
https://endless-sphere.com/forums/viewtopic.php?f=30&t=90037
https://endless-sphere.com/forums/viewtopic.php?f=30&t=74526&start=50#p1131906
http://www.northerndtool.com/bionx

______________________________________________________
Crystalyte 530X, 540X

53XX has 30mm wide magnets, 54XX has 40mm wide magnets Here are Docto4rbass' 5-series specs list: https://endless-sphere.com/forums/viewtopic.php?f=2&t=63142&start=1100#p1027125)

Amberwolf dis-assembles a 5304
https://endless-sphere.com/forums/viewtopic.php?f=4&t=64279

Doctor Bass data on Crystalyte 5XXX series
https://endless-sphere.com/forums/viewtopic.php?f=16&t=19301

DocBass thread X5404
https://endless-sphere.com/forums/viewtopic.php?f=3&t=23963&hilit=7400

"Crystalyte 5404- incredible torque"
https://endless-sphere.com/forums/viewtopic.php?f=3&t=24805

pic of 5X open
https://endless-sphere.com/forums/viewtopic.php?f=3&t=46907&start=25#p687749
__________________________________________________________________
Crystalyte 35XX (3525, 3540, 3548, Kv: 7.1, 10.4, 13.0)
cable inside dropouts, temp sensor, 18mm caliper clearnce
https://endless-sphere.com/forums/viewtopic.php?f=3&t=30902
https://endless-sphere.com/forums/viewtopic.php?f=2&t=24593
__________________________________________________________________
Crystalyte 4065/4080
4065 build
https://endless-sphere.com/forums/viewtopic.php?f=1&t=49136
https://endless-sphere.com/forums/viewtopic.php?f=2&t=52063

__________________________________________________________________
Crown motor, TC3080, TC65, TC80, TC100 40mm wide stator

https://endless-sphere.com/forums/viewtopic.php?f=31&t=48207
https://endless-sphere.com/forums/viewtopic.php?f=3&t=46907

The Crown TC 3080 (30mm wide stator)
https://endless-sphere.com/forums/viewtopic.php?f=30&t=76492
__________________________________________________________________
Cromotor

160mm drop-outs
https://endless-sphere.com/forums/viewtopic.php?f=6&t=53867&start=75#p813152
https://endless-sphere.com/forums/viewtopic.php?f=6&t=47970

Hubzilla cromotor V2 (US spec) 145mm drop-outs (pics)
https://endless-sphere.com/forums/viewtopic.php?f=2&t=48099
https://endless-sphere.com/forums/viewtopic.php?f=31&t=46832
17-pages https://endless-sphere.com/forums/viewtopic.php?f=2&t=33831
22-pages https://endless-sphere.com/forums/viewtopic.php?f=31&t=35924
Cro home page http://www.zelenavozila.com/

"croborg commuter" 26 pages
https://endless-sphere.com/forums/viewtopic.php?f=3&t=34929

company owner "accountant", US dealer "zombiess"
___________________
QS / Quan Shun Motor, model 205, 3000W
https://endless-sphere.com/forums/viewtopic.php?f=31&t=65972&start=125

Leafmotor, Direct Drive hub, 35mmwide stator, 2 pages
https://endless-sphere.com/forums/viewtopic.php?f=30&t=66489

MXUS 3000W, Direct drive hub motor, 45mm wide stator, 42 pages
https://endless-sphere.com/forums/viewtopic.php?f=2&t=63142

Aotema front DD hub:
https://endless-sphere.com/forums/viewtopic.php?f=2&t=9146

Golden Motor Magic Pie
https://endless-sphere.com/forums/viewtopic.php?f=12&t=86149&start=75#p1287035

Copenhagen Wheel
CopenhagenWheel1.png
___________________________________________________________
 
Non-Hub Motors

80-100 RC motors (Turnigy, Alien, etc)
https://endless-sphere.com/forums/viewtopic.php?f=30&t=84112&start=25#p1316687

80-100 Alien Power (compared to RV 100)
https://endless-sphere.com/forums/viewtopic.php?f=30&t=94975

120-90 (pancake RC) from Alien Power
https://endless-sphere.com/forums/viewtopic.php?f=30&t=84112&start=25#p1315216

Headline motor, used in EGO, AFT, Cyclone, etc
https://endless-sphere.com/forums/viewtopic.php?f=16&t=62589

Golden Motor HPM 3-Kw/ 7.2-inch diameter
https://endless-sphere.com/forums/viewtopic.php?f=30&t=63071
https://endless-sphere.com/forums/viewtopic.php?f=30&t=69633&p=1050830

eZip/Currie
https://www.electricbike.com/2014-ezip-trailz-lithium/

Canadian "Strong" branded, brushed, similar to eZip/Currie
https://endless-sphere.com/forums/viewtopic.php?f=3&t=70210

GNG motor...pics, specs, and dis-assembly video
https://endless-sphere.com/forums/viewtopic.php?f=28&t=42785&start=780#p674715
https://endless-sphere.com/forums/viewtopic.php?f=28&t=42785&start=825#p675568
https://www.youtube.com/watch?v=WFbMbHrMTIc

LightningRods big block
https://endless-sphere.com/forums/viewtopic.php?f=28&t=57720&start=450#p896671
https://endless-sphere.com/forums/viewtopic.php?f=28&t=57720&start=2275#p974954

BHT, low Kv "big block"
https://endless-sphere.com/forums/viewtopic.php?f=28&t=57483&start=125#p899535

Cyclone 3000W
https://endless-sphere.com/forums/viewtopic.php?f=6&t=74166#p1119118

Agni, axial flux, 205mm diameter, brushed
http://insideevs.com/wp-content/uploads/2015/06/Agni-Motor.jpg
https://endless-sphere.com/forums/viewtopic.php?f=30&t=29711
http://www.jozztek.com

Mars, axial flux, similar to Etek, but brushless
http://acuteaero.com/2010/06/16/breaking-and-fixing-the-mars-bldc-brushless-motor/

Emrax, Axial-flux
http://build-its-inprogress.blogspot.com.au/2017/05/emrax-motor-teardown.html?m=1

Rotomax 150cc (RC motor, equivalent to a 150cc gas motor)
https://endless-sphere.com/forums/viewtopic.php?f=28&t=46813&start=25#p691522
http://imgur.com/a/rfQCb#0
https://endless-sphere.com/forums/viewtopic.php?f=30&t=48580

Astro 3210
https://endless-sphere.com/forums/viewtopic.php?f=28&t=39035

Transmagnetics
https://endless-sphere.com/forums/viewtopic.php?p=1059167#p1059167

Joby (0.12mm lamination thickness, happy to do 9000rpm, inductance is very low)
https://endless-sphere.com/forums/viewtopic.php?f=30&t=27571&start=100#p492318

Revolt RV 100
https://endless-sphere.com/forums/viewtopic.php?f=30&t=94975
https://endless-sphere.com/forums/viewtopic.php?f=30&t=94975&start=50#p1448490
ttps://endless-sphere.com/forums/viewtopic.php?f=30&t=94975&start=125#p1452407

Revolt RV 120
https://endless-sphere.com/forums/viewtopic.php?f=30&t=85534&start=25#p1256635

Revolt RV 160
https://endless-sphere.com/forums/viewtopic.php?f=28&t=69545&start=50#p1106095

TSDZ2 mid drive, 350W, torque-sensing, similar to Bafang BBS01
https://endless-sphere.com/forums/viewtopic.php?f=28&t=79788#p1189445

Bofeili mid drive
http://cyclurba.fr/forum/165231/tes...916&messageID=165231&rubriqueID=110&pageprec=

Bosch 2018
https://endless-sphere.com/forums/viewtopic.php?f=28&t=93831#p1379238
 
Back
Top