I've been playing around with this and done some research etc.
The C2 setting are the motor phases. Most LCD's have settings from 0-7. Bafang would be 0 and 1-7 for a sine wave controller. However my KT-LCD8H only has 2 values or C2, 0 or 1. For 0 the pedal assist is bit "noisy"? It sounds rough. For 1 it seems smoother. Does anyone have any advice as what it should be set to?
The C2 setting are the motor phases. Most LCD's have settings from 0-7. Bafang would be 0 and 1-7 for a sine wave controller. However my KT-LCD8H only has 2 values or C2, 0 or 1. For 0 the pedal assist is bit "noisy"? It sounds rough. For 1 it seems smoother. Does anyone have any advice as what it should be set to?