poeleafrire6
1 µW
- Joined
- Apr 1, 2020
- Messages
- 2
Hello,
Here is my configuration :
Tandem : 440 lbs (= 200 kg)
Battery : 52 V ; 23.8 A.h
Controller : 40 A (battery Intensity)
Motor : front MAC 10t ; 26"
CA : CA3-14
CA Setup Utility : v1.54
In preset 2, I set my "assist start level" at 400 W but actually (read on the CA), "assist start level" is nearly 800W. (That is my problem).
In preset 3, I set my "assist start level" at 1000 W actually (read on the CA), "assist start level" is nearly 1000W.
When I feel that I pedal at 90 rpm, the CA show 90 rpm.
I think that the sensort see the 12 magnet of the magnetic disc because in 1 turn of crank, i can see the LED of the sensor light 12 times.
If I set the "Power limit" at 400W actually (read on the CA), the power is limited to nearly 400 W ; so I think that the CA is able to regulate this configuration.
I tried to swap the sensor, but nothing changed.
Here is my "CA Setup Utility" setup :
Does anyone has an idea of how to fix it?
Thanks you in advance.
I am a new member, this is my first post, i hope I am in the good section.
By the way, I am French, i hope my english will be correct.
Here is my configuration :
Tandem : 440 lbs (= 200 kg)
Battery : 52 V ; 23.8 A.h
Controller : 40 A (battery Intensity)
Motor : front MAC 10t ; 26"
CA : CA3-14
CA Setup Utility : v1.54
In preset 2, I set my "assist start level" at 400 W but actually (read on the CA), "assist start level" is nearly 800W. (That is my problem).
In preset 3, I set my "assist start level" at 1000 W actually (read on the CA), "assist start level" is nearly 1000W.
When I feel that I pedal at 90 rpm, the CA show 90 rpm.
I think that the sensort see the 12 magnet of the magnetic disc because in 1 turn of crank, i can see the LED of the sensor light 12 times.
If I set the "Power limit" at 400W actually (read on the CA), the power is limited to nearly 400 W ; so I think that the CA is able to regulate this configuration.
I tried to swap the sensor, but nothing changed.
Here is my "CA Setup Utility" setup :
Does anyone has an idea of how to fix it?
Thanks you in advance.
I am a new member, this is my first post, i hope I am in the good section.
By the way, I am French, i hope my english will be correct.