AlexChato9
1 µW
- Joined
- Jul 22, 2020
- Messages
- 1
Hi!
I just got myself a Baserunner L10 which is running on 48V and the first time I connected it with the Phaserunner Suite, I automatically get: Faults2[1]: Current Scaling. It's there with/without the motor hall connected and it's the same thing when there's just no motor at all. I don't have a Cycle Analyst; only 2x throttle (1x for acceleration and 1x for regen braking)
What are the possible causes? I can't find anything about that on the Web. Here's my XML config file that I never tested yet.View attachment 500W Hub.xml
Thanks!
I just got myself a Baserunner L10 which is running on 48V and the first time I connected it with the Phaserunner Suite, I automatically get: Faults2[1]: Current Scaling. It's there with/without the motor hall connected and it's the same thing when there's just no motor at all. I don't have a Cycle Analyst; only 2x throttle (1x for acceleration and 1x for regen braking)
What are the possible causes? I can't find anything about that on the Web. Here's my XML config file that I never tested yet.View attachment 500W Hub.xml
Thanks!