PAS does not work in stand

808

10 mW
Joined
Nov 12, 2020
Messages
33
My PAS works in normal riding, but when I have the ebike powered and in a stand, pedaling does not make the motor run. Is torque sensing in motors?
 
I will answer my own question here. If in "maintenance mode" the pedal needs to have a good amount of force for the torque sensing motor to register the pedaling-assist request. You will hear the motor briefly.
 
Thanks for the tip!

Did you get the OEM Genze motor controller working, or did you replace it?
 
Hello GalStaf,

I am sorry I did not reply. I moved from GenZe to another brand. I do not recall if I changed the controller. The GenZe is a robust system. The problem probably was a motor (the GenZes were in an app-based fleet, so they took MAJOR public abuse and deliberate vandalism). I hope you got your issue resolved before now. (sry).
 
Back
Top