Hello, ES!
I am trying to upgrade the B&W LCD 800S display and Lishui 36V controller currently installed in my M2S All Go Carbon with 350W Bofeili mid-drive motor. I picked up the Bafang DPC-18 display, which communicates via the UART protocol. I hoped it might work with the Lishui controller, but I get a "communication error 30" when hooking it up. I think there are some ways to reprogram the Lishui by hooking it up to one's computer but I never got that far. So, now I'm on the hunt for a controller that might be compatible with both the display and the motor I already have.
I'm hoping to find a sinewave FOC controller rated to up to 1000W peak that accepts a manual thumb throttle input (and optionally offers PAS... I rarely use it) and that is capable of up to 48V nominal, as I might upgrade the battery pack in the future. Torque-based throttle and throttle mapping would be added bonuses, in case I ever go dual motor.
Am I barking up the wrong tree, here? Can the DPC-18 *ONLY* control Bafang motors? Thanks in advance for any insight.
-Jon
I am trying to upgrade the B&W LCD 800S display and Lishui 36V controller currently installed in my M2S All Go Carbon with 350W Bofeili mid-drive motor. I picked up the Bafang DPC-18 display, which communicates via the UART protocol. I hoped it might work with the Lishui controller, but I get a "communication error 30" when hooking it up. I think there are some ways to reprogram the Lishui by hooking it up to one's computer but I never got that far. So, now I'm on the hunt for a controller that might be compatible with both the display and the motor I already have.
I'm hoping to find a sinewave FOC controller rated to up to 1000W peak that accepts a manual thumb throttle input (and optionally offers PAS... I rarely use it) and that is capable of up to 48V nominal, as I might upgrade the battery pack in the future. Torque-based throttle and throttle mapping would be added bonuses, in case I ever go dual motor.
Am I barking up the wrong tree, here? Can the DPC-18 *ONLY* control Bafang motors? Thanks in advance for any insight.
-Jon