I have a 6 pin connector with the colors:
Connector PCB imprint
Black P-
Red 4.3V
White SD
Yellow P +
Braun VCC (on PCB same soldering point)
Green VCC (on PCB same soldering point)
Can I switch on the controller without the control unit / display via a bridge?
Connector PCB imprint
Black P-
Red 4.3V
White SD
Yellow P +
Braun VCC (on PCB same soldering point)
Green VCC (on PCB same soldering point)
Can I switch on the controller without the control unit / display via a bridge?