Adapter for Motor Connector?

jomifebike

1 µW
Joined
Aug 11, 2021
Messages
1
Trying to go from a Bafang RM G062.750/1000.DC hub motor (https://bafang-e.com/en/oem-area/components/component/motor/rm-g0627501000dc/) to RM G0F0.500/750/1000.D/DC motor (https://bafang-e.com/oem-area/components/component/motor/rm-g0f05007501000ddc/), but the motor connector is different. Is it possible to make an adapter for Julet Z916 9-pin connector to a Higo L1019 Motor 10-pin connector?
 
Did you ever find an adapter? I am thinking of making one. Grin Technologies made me one but I think it is faulty. Bike hesitates on takeoff and no power if rolling backwards. I want to build my own or buy another.

Thanks
 
Super late reply, sorry and checking this forum more often now. My adapter cable is probably fine. Seems some other people using Baserunner controller have trouble getting their bikes to move from a standstill and ok with a pedal start.

Grin now sells a clean version of the adapter cable. The one they made for me was made in their shop with heat shrink tube and jst connector. I am going to order the finished version in case it is the cable. I am ready to throw away 20 bucks if there is a chance it fixes my issue.
 
Update. Motor cable connector is fine. I replaced the 1st gen cable with the final version they sell on ebikes.ca and my issue is still the same.
 
Back
Top