franciscogalaz
1 mW
- Joined
- Feb 15, 2017
- Messages
- 13
Hi everyone,
I am ordering a 13s7p battery with Sanyo GA cells in a Reention DP-9 case.
I needed guidance on which bms should I pick for it. The seller says a 40A continous BMS won't fit (Daly with balancing), so is suggesting a 30A BMS (no balancing or bluetooth) named Super Power 30A
My usage would be with a BBSHD rated 30A and I read that its better to use a BMS rated a little higher (obviously if my cells can handle it which they can) so not to stress the BMS and also if you ever want to use a higher rated motor.
My questions are:
1) do you know any good quality 40A BMS that could fit the reention dp-9 case? (Ideally with bluetooth and auto balancing), or in the worst case a 30A BMS with those fubctions.
2) or do you think it is just fine with the 30A BMS?
The seller is Jenny from Aijiu Power (recommended in several forums).
Thank you very much!
I am ordering a 13s7p battery with Sanyo GA cells in a Reention DP-9 case.
I needed guidance on which bms should I pick for it. The seller says a 40A continous BMS won't fit (Daly with balancing), so is suggesting a 30A BMS (no balancing or bluetooth) named Super Power 30A
My usage would be with a BBSHD rated 30A and I read that its better to use a BMS rated a little higher (obviously if my cells can handle it which they can) so not to stress the BMS and also if you ever want to use a higher rated motor.
My questions are:
1) do you know any good quality 40A BMS that could fit the reention dp-9 case? (Ideally with bluetooth and auto balancing), or in the worst case a 30A BMS with those fubctions.
2) or do you think it is just fine with the 30A BMS?
The seller is Jenny from Aijiu Power (recommended in several forums).
Thank you very much!