Controller thin red and orange "power lock" connection

egmontus

1 µW
Joined
Oct 26, 2021
Messages
1
This is my first bike build so this is probably an easy question. My controller came with a "power lock" connection with red and orange wires, both are thinner. I am assuming these are the ignition wires. Can I jump the ignition if I don't have a main power switch? If not, how do I wire to an ignition switch?
 
if the red wire has battery voltage on it, you just connect the orange wire to it to turn on the ocntroller.

if using a switch with only two contacts then one wire goes on each contact.

make sure to never hook either wire to anything that is just 5v stuff like ebrakes or throttle, etc.
 
Back
Top