I'm in the process of buying 3 x 6s Turnigy 12,000mAh battery packs to connect in series. These will be used to power my eBike.
I would like to confirm that I am covering all my bases with this setup. I am planning to buy:
3 x 6s Turnigy 12,000mAh battery packs to be connected in series to make an 18s pack.
https://hobbyking.com/en_us/turnigy-high-capacity-battery-12000mah-6s-12c-drone-lipo-pack-xt90.html?wrh_pdp=6&utm_source=google&utm_medium=cpc&utm_campaign=google_au_shopping&countrycode=AU&gclid=CjwKCAiA55mPBhBOEiwANmzoQhPL44YA5zPRMjtCN0KaVOEsOD9BCEBdPSaqZjLp5FSAb0xq6iJP-RoCpvIQAvD_BwE&gclid=CjwKCAiA55mPBhBOEiwANmzoQhPL44YA5zPRMjtCN0KaVOEsOD9BCEBdPSaqZjLp5FSAb0xq6iJP-RoCpvIQAvD_BwE
2 x XT90 series connectors. First to connect two packs together, then the output of these two packs will be connected to the third pack.
https://hobbyking.com/en_us/xt90-series-adapter.html?wrh_pdp=6&utm_source=google&utm_medium=cpc&utm_campaign=google_au_shopping&countrycode=AU&gclid=CjwKCAiA55mPBhBOEiwANmzoQhLwSKhBiFJRNnjm7al8EdjsWI-uFpCVe-oOjYqM77SDAvmcJkjPlhoCps4QAvD_BwE
1 x ISDT Q8 MAX battery charger.
https://hobbyking.com/en_us/isdt-q8-max-touch-screen1-8s-1000w-30a-dc-smart-balance-charger-discharger.html?queryID=1092583ad7f8e06256d83e24c355e664&objectID=86329&indexName=hbk_live_products_analytics
1 x Parallel charging board
https://hobbyking.com/en_us/turnigy-xt90-jst-xh-parallel-charging-board-w-fuse-for-6-x-2-6s-battery-packs-4mm-banana-plug-charger-connectors.html?queryID=d26740ccc318395fef3eda62c077f319&objectID=86319&indexName=hbk_live_products_analytics
2 x server power supply units which I will have to connect in series to output a voltage of 24V
Is there anything else I need to think about? I will also be 3d printing a case for the battery packs, and adding padded foam to absorb all the shocks from off road riding.
Appreciate any advice
I would like to confirm that I am covering all my bases with this setup. I am planning to buy:
3 x 6s Turnigy 12,000mAh battery packs to be connected in series to make an 18s pack.
https://hobbyking.com/en_us/turnigy-high-capacity-battery-12000mah-6s-12c-drone-lipo-pack-xt90.html?wrh_pdp=6&utm_source=google&utm_medium=cpc&utm_campaign=google_au_shopping&countrycode=AU&gclid=CjwKCAiA55mPBhBOEiwANmzoQhPL44YA5zPRMjtCN0KaVOEsOD9BCEBdPSaqZjLp5FSAb0xq6iJP-RoCpvIQAvD_BwE&gclid=CjwKCAiA55mPBhBOEiwANmzoQhPL44YA5zPRMjtCN0KaVOEsOD9BCEBdPSaqZjLp5FSAb0xq6iJP-RoCpvIQAvD_BwE
2 x XT90 series connectors. First to connect two packs together, then the output of these two packs will be connected to the third pack.
https://hobbyking.com/en_us/xt90-series-adapter.html?wrh_pdp=6&utm_source=google&utm_medium=cpc&utm_campaign=google_au_shopping&countrycode=AU&gclid=CjwKCAiA55mPBhBOEiwANmzoQhLwSKhBiFJRNnjm7al8EdjsWI-uFpCVe-oOjYqM77SDAvmcJkjPlhoCps4QAvD_BwE
1 x ISDT Q8 MAX battery charger.
https://hobbyking.com/en_us/isdt-q8-max-touch-screen1-8s-1000w-30a-dc-smart-balance-charger-discharger.html?queryID=1092583ad7f8e06256d83e24c355e664&objectID=86329&indexName=hbk_live_products_analytics
1 x Parallel charging board
https://hobbyking.com/en_us/turnigy-xt90-jst-xh-parallel-charging-board-w-fuse-for-6-x-2-6s-battery-packs-4mm-banana-plug-charger-connectors.html?queryID=d26740ccc318395fef3eda62c077f319&objectID=86319&indexName=hbk_live_products_analytics
2 x server power supply units which I will have to connect in series to output a voltage of 24V
Is there anything else I need to think about? I will also be 3d printing a case for the battery packs, and adding padded foam to absorb all the shocks from off road riding.
Appreciate any advice