Grin Baserunner/Phaserunner V4 with eggrider or other displays

JSBC

1 µW
Joined
Mar 14, 2022
Messages
1
I've noted that grin has added a 9 pin mains signal plug to new V4 baserunners and phaserunners and state compatibility with displays

The Baserunner can be used with Third party displays (King Meter, Bafang,
Eggrider etc.) that communicate with a range of digital protocols through the use
of the 9 pin Mains cable and a custom made cable harness and splitter junction.
At present Grin only provides support for this hookup to OEM customers
purchasing complete systems with Third party displays using the KM5s protocol

When I asked grin about this I got the following reply:

The current Baserunner V4 only supports third-party displays using the KM5s protocol. You can use a King Meter with this controller, but not the Bafang displays or Eggrider.


The eggrider people said they had customers that had it working... I'm not quite sure who to believe!

Anyone had experience with this combination?
 
it does not work with bafang unfortunately. Haven't tried eggrider or kingmeter. Still looking for which display to replace my bafang 500c display.
 
I see 6 different models where the model number starts with K5* here:
http://www.king-meter.com/#/

Maybe Grin Tech is referring to those?
 
Back
Top