How to increase the assist speed - Lishui controller

marcinkeska1

1 µW
Joined
May 23, 2022
Messages
1
Hello,

I bought my first e-bike, ORUS E3000 (https://www.mediaexpert.pl/rowery/rower-elektryczne/rowery-elektryczne/rower-elektryczny-mtb-orus-e3000-czarny-mat). The specification is:
engine: MXUS XF08 36V 250W 700C
display: C500 (http://www.bigstone-nj.com/node/12, https://yosepower.com/products/electric-bike-lcd-display)
controller: Lishui EPAC Drive System LSW06-HLK1CFSB (LSW0768-05-01E), serial number X20110962122, produced on 11/2020, Vrated: 36V, I rated: 7A, Vcutoff: 31V, I max: 15A
battery: 36V 10.4Ah

At the moment the maximum speed of the engine is 25 km/h but I know that in this model from 2-3 years ago it was possible to set the speed up to 32 km/h (with the same engine, battery and display). In the new bikes I can set it on the display but the engine stops after reaching 25 km/h. Is it possible to program the controller so I can ride at 30-32 km/h? If not, is it possible to replace it with some other controller that would work? I would be very thankful for your help, it is very important for me. I use the bike on a private property with no speed limits :)

I know that Lishui provides the soft for programming controllers but have no idea if it works with mine: https://www.lsdzs.com/ls_download/

pictures:
http://notoladnie.stronazen.pl/rower/wyswietlacz_1.jpg
http://notoladnie.stronazen.pl/rower/wyswietlacz_2.jpg
http://notoladnie.stronazen.pl/rower/wyswietlacz_3.jpg
http://notoladnie.stronazen.pl/rower/sterownik_1.jpg
http://notoladnie.stronazen.pl/rower/sterownik_2.jpg
http://notoladnie.stronazen.pl/rower/silnik.jpg
http://notoladnie.stronazen.pl/rower/bateria.jpg
 
Back
Top