Hello All and hope this is posted in correct place?
I have a Hyper Emtn bike which used to drive me crazy when it got too 15 .5 mph and the motor felt then like a ton of bricks thrown off the back to slow you down.
I decided to experiment a little and put a 17 amp kt controller on it with a kt lcd 3 generic display and a throttle for test purposes .
On first power up the 36 volt battery and 250watt motor got me up to 20 mph with no problem although the pas didn't work till I fitted a v12 sensor ,however although these both now work I am having trouble getting the correct info to set the parameters for P1 ect and my speed now reads wrong .
Does anyone know the correct number to programme in for the xiongda motor ? I believe it is a geared motor but even hyper haven't given me the technical info I requested.
Other lcd3 setting I have followed from the ubube video from Bolton bikes .
Please accept my apology s if I have posted this and it has been answered before.
numbers on motor are SOF3626250W
Many Thanks Chris .
I have a Hyper Emtn bike which used to drive me crazy when it got too 15 .5 mph and the motor felt then like a ton of bricks thrown off the back to slow you down.
I decided to experiment a little and put a 17 amp kt controller on it with a kt lcd 3 generic display and a throttle for test purposes .
On first power up the 36 volt battery and 250watt motor got me up to 20 mph with no problem although the pas didn't work till I fitted a v12 sensor ,however although these both now work I am having trouble getting the correct info to set the parameters for P1 ect and my speed now reads wrong .
Does anyone know the correct number to programme in for the xiongda motor ? I believe it is a geared motor but even hyper haven't given me the technical info I requested.
Other lcd3 setting I have followed from the ubube video from Bolton bikes .
Please accept my apology s if I have posted this and it has been answered before.
numbers on motor are SOF3626250W
Many Thanks Chris .