Hello
I am new to the group and quiet new to EBikes but have a little electrical knowledge from motor vehicle.
I purchased an Ebike cheap as a non runner. It’s wires to the drive we’re caught in the chain and even with them repaired it’s dead.
The charger charges the 36v battery to 42 volts and the charger terminals are live.
The output terminals at the bottom is dead on the Neg but live on the Pos
Following the wires they go to what I know know is the BMS. If I bridge them across I have power at the base terminal.
I am not sure what to do next. Tempted to join the terminals with a strong fuse ?
I read that they can be reset by removing the connectors but this don’t seem to have made any difference.
I hope you can see my pictures and the heavy black wires.
Thanks Ken
I am new to the group and quiet new to EBikes but have a little electrical knowledge from motor vehicle.
I purchased an Ebike cheap as a non runner. It’s wires to the drive we’re caught in the chain and even with them repaired it’s dead.
The charger charges the 36v battery to 42 volts and the charger terminals are live.
The output terminals at the bottom is dead on the Neg but live on the Pos
Following the wires they go to what I know know is the BMS. If I bridge them across I have power at the base terminal.
I am not sure what to do next. Tempted to join the terminals with a strong fuse ?
I read that they can be reset by removing the connectors but this don’t seem to have made any difference.
I hope you can see my pictures and the heavy black wires.
Thanks Ken
Attachments
-
ED6AC967-330B-458C-B385-A734AB8EB4BF.jpeg41.9 KB · Views: 562
-
57D81D87-6F1C-4CFD-9CDB-901BF34A9BBF.jpeg811.8 KB · Views: 562
-
BD2B4E7B-F340-40F0-B6CF-6C1107152B08.jpeg1.1 MB · Views: 562
-
1825F735-920C-49A9-B629-32B3D18CAFD7.jpeg1.2 MB · Views: 562
-
6A7CC3AC-307C-4E58-A29E-416B04FE66F6.jpeg1.4 MB · Views: 562