rick_p
100 W
The goal is to figure out what the controller supports that I'm not using yet (there are connectors that I don't know what they are for).
A few preliminary notes:
The bike is operational but it's throttle only. I'm not unhappy with it but I'd love to add a PAS sensor if it supports it, and if it does, I'd like to add brake sensors to cut the power when braking.
This is the same bike I posted about in the Build section where I covered how I built the custom bracket to convert the bike to disk brakes. (https://endless-sphere.com/forums/viewtopic.php?f=6&t=116725)
I found a couple of previous posts on this topic (controller wiring). Both are useful so I'll add links to them here, but neither was useful at helping me finish wiring up my controller.
Whats the basic layout for an E bike wiring harness (https://endless-sphere.com/forums/viewtopic.php?t=27509)
36V 22A Controller wiring questions (https://endless-sphere.com/forums/viewtopic.php?t=80435)
I tried searching the internet for the only number found on the controller (ZHZ48V1000W) and found nothing.
The controller came in a kit that included a wheel, the controller, and a throttle with battery indicator lights, but I don't know who the seller was because I got the kit second hand.
The wheel has a number on it too. (HBS-48V1000W1708 4414)
Wiring up the basics was easy because the wires are all color coded and/or the connectors matched up uniquely. I'll post everything in case it helps figure out what my extra connectors are for, and also to help others who are struggling with the basics.
Here are the three mystery connectors with voltages:
Here are the throttle/power button/battery indicator connectors:
Here are the motor connectors:
Here is the power connector:
Here is the generic controller:
Anyone know what the mystery connectors are for?
A few preliminary notes:
The bike is operational but it's throttle only. I'm not unhappy with it but I'd love to add a PAS sensor if it supports it, and if it does, I'd like to add brake sensors to cut the power when braking.
This is the same bike I posted about in the Build section where I covered how I built the custom bracket to convert the bike to disk brakes. (https://endless-sphere.com/forums/viewtopic.php?f=6&t=116725)
I found a couple of previous posts on this topic (controller wiring). Both are useful so I'll add links to them here, but neither was useful at helping me finish wiring up my controller.
Whats the basic layout for an E bike wiring harness (https://endless-sphere.com/forums/viewtopic.php?t=27509)
36V 22A Controller wiring questions (https://endless-sphere.com/forums/viewtopic.php?t=80435)
I tried searching the internet for the only number found on the controller (ZHZ48V1000W) and found nothing.
The controller came in a kit that included a wheel, the controller, and a throttle with battery indicator lights, but I don't know who the seller was because I got the kit second hand.
The wheel has a number on it too. (HBS-48V1000W1708 4414)
Wiring up the basics was easy because the wires are all color coded and/or the connectors matched up uniquely. I'll post everything in case it helps figure out what my extra connectors are for, and also to help others who are struggling with the basics.
Here are the three mystery connectors with voltages:
Here are the throttle/power button/battery indicator connectors:
Here are the motor connectors:
Here is the power connector:
Here is the generic controller:
Anyone know what the mystery connectors are for?