is my asi-bac800 dead?

asosol

10 µW
Joined
Aug 22, 2019
Messages
6
hi all.
I have an asi-bac800 connected to my bbs02-750.
One day the pin for key-in fell out.. #22. so I decided to plug it back in.. but ever since that day, my asi bac wont come back on.
When I open the 'bacdoor' app and search for bluetooth connections, it wont find the asi back device.

So I verified that the power input to the asi bac gets the 58V. that is good.

then I started measuring the voltage by holding %5 GND on the asi-bacs pin and testing out the other pins.. ... but absolutely no voltage on any of them. Now I get nervous, as # 13 should show 12V... but nothing at all.

Is my ASI burned? :(
 

Attachments

  • Skærmbillede 2022-11-16 211519.png
    Skærmbillede 2022-11-16 211519.png
    135.3 KB · Views: 111
  • Skærmbillede 2022-11-16 212147.png
    Skærmbillede 2022-11-16 212147.png
    775.6 KB · Views: 111
im giving it power.. connected keyin/out (21/22)... but no voltage what so ever anywhere. and the software is not finding it.
 

Attachments

  • thumbnail_IMG_0115.jpg
    thumbnail_IMG_0115.jpg
    65.2 KB · Views: 105
  • thumbnail_IMG_0116.png
    thumbnail_IMG_0116.png
    104.1 KB · Views: 105
problem solved : i took the + from my battery, and connected it to PIN22. then the controller started up again.
aparently the pin22 (keyin) was burned ... i probably put it the wrong cabled back in, when it fell out.

but now everything working again.
 
Back
Top