firemagnets
10 µW
- Joined
- Jan 26, 2023
- Messages
- 6
Hi All,
Just realised that my temp sensor readout on the controller says 16 degrees C while using a 1000 ohm resistor the actual temperature is around 28C what is the actual resistance needed to get an accurate readout on this controller?
Im using a MAC 8t motor and y controller is the Kelly KLS4812S.
Just realised that my temp sensor readout on the controller says 16 degrees C while using a 1000 ohm resistor the actual temperature is around 28C what is the actual resistance needed to get an accurate readout on this controller?
Im using a MAC 8t motor and y controller is the Kelly KLS4812S.