Sticky thread index for "E-bike Technical"

Status
Not open for further replies.

spinningmagnets

Moderator
Staff member
Joined
Dec 21, 2007
Messages
12,951
Location
Ft Riley, NE Kansas
Please be patient as this information storage will be organized over time. Any moderator may feel free to unlock and expand/re-arrange/improve as you see fit...

troubleshooting video for hall sensors, very detailed
https://www.youtube.com/watch?v=tnsxs4Hz2Dw

"(Yet Another) DIY Pre-charge/Kill-switch/Power Isolator" serious_sam, one page
https://endless-sphere.com/forums/viewtopic.php?f=2&t=105110

"Making a DIY fender with fiberglass", Mattycii
https://endless-sphere.com/forums/viewtopic.php?f=2&t=49927#p805265

"Definitive Tests on the Heating and Cooling of Hub Motors" (justin_le, 23 pages [includes links to many oil-cooling/ventilating-sideplates threads])
http://endless-sphere.com/forums/viewtopic.php?f=2&t=48753

"Oil cooling your hub- NOT snake oil!" (spicerack, 23 pages)
http://endless-sphere.com/forums/viewtopic.php?f=2&t=37972

"RUST: DIY Hub Motor Repair & Restoration"
https://endless-sphere.com/forums/viewtopic.php?f=30&t=34135

"Temp sensor that's too cool not to share" (Auraslip, 4 pages)
http://endless-sphere.com/forums/viewtopic.php?f=1&t=25502

"Torque Arm Picture Thread" (auraslip, 6 pages)
http://endless-sphere.com/forums/viewtopic.php?f=2&t=26444

"Using 16/17/18/19-inch moped rims on large DD hubmotors" (spinningmagnets, one page [plus many links to other threads])
http://endless-sphere.com/forums/viewtopic.php?f=2&t=69104&p=1048226#p1048226

"Cycle Analyst V3 - Unofficial User Guide / User Manual" (Teklektik, link from the middle of 111-page CA thread)
http://endless-sphere.com/forums/viewtopic.php?f=4&t=37964&start=225#p571345

"DIY custom frames, home carbon-fiber method simplified" (spinningmagnets, 3 pages)
http://endless-sphere.com/forums/viewtopic.php?f=2&t=10906

"Dropout Failure Experiments, and a call for Fork Donations" (justin_le, 8 pages)
http://endless-sphere.com/forums/viewtopic.php?f=2&t=14195

"Lebowski's motor controller IC, schematic and setup manual" (Lebowski, 48 pages)
http://endless-sphere.com/forums/viewtopic.php?f=30&t=36602

"The wheel-building spoke-lacing thread, post your tips" (spinningmagnets, 5 pages)
http://endless-sphere.com/forums/viewtopic.php?f=2&t=64324

"Using Reed Switches For E-Brakes" (rkosiorek RIP, one page with more links)
http://endless-sphere.com/forums/viewtopic.php?f=16&t=11760

"Science, Physics, Math, & Myth" (Kingfish, 8 pages)
http://www.endless-sphere.com/forums/viewtopic.php?f=2&t=64907

"The ol Wineboy horn button regen trick" (dogman 2 pages)
https://endless-sphere.com/forums/viewtopic.php?f=3&t=59411

"Analysis of regen on an ebike" (Justin LE, Grin Tech)
https://endless-sphere.com/forums/viewtopic.php?f=2&t=7891

"Plug Braking"
https://endless-sphere.com/forums/viewtopic.php?f=2&t=3342

"Linear Regen Braking for On/Off Regen Controllers" (Amberwolf, one page)
https://endless-sphere.com/forums/viewtopic.php?f=2&t=17584

"Anderson connector technical information thread" (Amberwolf, one page)
https://endless-sphere.com/forums/viewtopic.php?f=2&t=17969

"2019 16" moped/scooter tire pop-off: which is the most puncture proof?" (Neptronix, one page)
https://endless-sphere.com/forums/viewtopic.php?f=2&t=97992

"Adding a resistor/potentiometer inline with throttle to limit power and top-speed"
https://endless-sphere.com/forums/viewtopic.php?f=2&t=99894
 
Technical threads concerning RC motors and controllers (ESC's)

"Timing Adjustment Tool" (Burtie, 18 pages)
http://endless-sphere.com/forums/viewtopic.php?f=2&t=19054

"Adding hall sensors to outrunners" (Burtie, 16 pages)
http://www.endless-sphere.com/forums/viewtopic.php?f=30&t=15686

"mounting hall sensors to R/C brushless motors" (georgeycc, 11 pages)
http://www.endless-sphere.com/forums/viewtopic.php?f=30&t=9061

RC-ESC vs E-bike controllers" (Jeremy Harris, one page)
http://endless-sphere.com/forums/viewtopic.php?f=2&t=23882

"Optical sensors for commutation -Working" (Burtie, 4 pages)
http://endless-sphere.com/forums/viewtopic.php?f=2&t=28966

"Adding burtie internal optical sensors to Astro 3210" (http://www.recumbents.com, one page)
http://endless-sphere.com/forums/viewtopic.php?f=28&t=39035
 
Status
Not open for further replies.
Back
Top