I have a hub BPM motor working with a 36V 22Acontroler & battery. I also have a spare 48V battery and controler (22AInfineon, use to work fine with a Nine Continent(9C) motor)
My question is if I can plug the 48V battery and controler into the BPM motor because:
- BPM is geared and 9C is direct drive so eventhough both use hall sensors maybe the controler is not compatible?
- increase the voltage from 36V to 48V may be too much for a chinese geared hub?
The 48V battery is in better shape and I can locate it inside the frame so this change can be a good improve if it works. A little more power is allways welcome.
Thanks in advance for any advice