Cyclone connection diagram

T4R · Oct 2, 2019

Hi, I need help.
I bought a used Cyclone 500W kit but I'm in this condition.

I need the connection diagram of the seven wires coming out of the control unit.
I will only use the univesal trottle and a switch to turn off and on the control unit.
Thanks. Best regards.

TommyCat · Oct 3, 2019

Perhaps you can figure it out using this fellows posted photo pics... best I could find. :roll:

https://mrbill.homeip.net/albums/cyclone_motor/pages/page_23.html

Regards,
T.C.

T4R · Oct 3, 2019

Thanks but mine is with integrated control unit and I don't have the plug.
Unfortunately none of those photos can help me.
Thank you again

TommyCat · Oct 3, 2019

Took a shot.

Perhaps an e-mail to a supplier?

https://www.cyclone-usa.com/support.php

Only other thought is if you take a look where the wires connect to the PCB and see if the wires are labeled. May give a clue.

T4R · Oct 4, 2019

Hi, the first thing I did was write to Cyclone but they still haven't answered me.
I will try as you suggested maybe I solve.
Thanks

TommyCat · Oct 4, 2019

As an example only... here is a pic of a Magic Pie V5 internal controller's labeling. May give clues. :?

Cyclone connection diagram

T4R

100 µW

Attachments

TommyCat

10 kW

T4R

100 µW

TommyCat

10 kW

T4R

100 µW

TommyCat

10 kW

Similar threads