Kona Dawg Primo BBSHD Conversion

cavi

10 W
Joined
Jan 20, 2020
Messages
79
So my conversion is done but not done. The bike is done, rode it this last weekend and it did great. What it still needs is a new fork and front wheel (both are on the way), then I need to figure out why I cannot run 8th and 9 th gears. They run fine without motor power. as soon as I power it up they do not run in those gears, I ordered a Lekkie sporket, as I am currently running a Eclipse sprockt( but with a spacer and still some washers for more spacing), I am guessing that the Lekkie will space the sprocket out a bit more and hopefully that will solve it. Also this is some video from the test ride yesterday: https://www.youtube.com/watch?v=5izk1ejvI2U&t=352s
kona.jpg
 
Back
Top