Astro 3220 shaft removal?

12-C

100 W
Joined
Oct 14, 2016
Messages
212
I've got a 3220 with the 3/8" shaft.

I want to modify the shaft and the easiest way to potentially would be to remove and reinsert.... Or have a brand new shaft fabricated and then inserted as a replacement.

Any ideas if this can be done without damaging the internal? I've never opened the can on this thing.
 
The response from Astro is that the shaft can not be removed.

My other thought is to use the motor itself like a lathe.... Fix it in a vice and essentially turn the shaft to the dimensions I need.

Any pointers with that ?
 
Back
Top