shap08
10 mW
- Joined
- Sep 16, 2019
- Messages
- 25
Motor, Controller and throttle: https://vevor.com.au/products/brushless-electric-motor-controller-48v-2000w-kit-go-kart-bicycle-powerful $176.99 AUD
Battery: Samsung 48V11.5ah lithium battery Free from a mate whose ebike got stolen
Frame: Picked this up off Gumtree; included new tyre; so i rotated them. $50 AUD
New BMX crank: https://www.aliexpress.com/item/4001351640605.html?spm=a2g0s.9042311.0.0.58164c4drvLewM $18 AUD
-This was done to keep it street legal in Australia
Pedals: https://www.aliexpress.com/item/4000352717280.html?spm=a2g0s.9042311.0.0.58164c4drvLewM $17 AUD
Motor chain and sprocket: https://www.aliexpress.com/item/4000780830741.html?spm=a2g0s.9042311.0.0.58164c4drvLewM $20 AUD
XT60 connector: https://www.aliexpress.com/item/4000182047762.html?spm=a2g0s.9042311.0.0.58164c4drvLewM $2 AUD
Three speed switch: https://www.aliexpress.com/item/1005002637344169.html?spm=a2g0s.9042311.0.0.614f4c4d4T7hkU $4 AUD
The frames of the Cx200 and cx450 appear to be the same in Australia. When compared to cx200 hard tail is US.
Any tips on mounting the motor?
[imghttps://i.imgur.com/SSAvaqG.jpg[/img]
Battery: Samsung 48V11.5ah lithium battery Free from a mate whose ebike got stolen
Frame: Picked this up off Gumtree; included new tyre; so i rotated them. $50 AUD
New BMX crank: https://www.aliexpress.com/item/4001351640605.html?spm=a2g0s.9042311.0.0.58164c4drvLewM $18 AUD
-This was done to keep it street legal in Australia
Pedals: https://www.aliexpress.com/item/4000352717280.html?spm=a2g0s.9042311.0.0.58164c4drvLewM $17 AUD
Motor chain and sprocket: https://www.aliexpress.com/item/4000780830741.html?spm=a2g0s.9042311.0.0.58164c4drvLewM $20 AUD
XT60 connector: https://www.aliexpress.com/item/4000182047762.html?spm=a2g0s.9042311.0.0.58164c4drvLewM $2 AUD
Three speed switch: https://www.aliexpress.com/item/1005002637344169.html?spm=a2g0s.9042311.0.0.614f4c4d4T7hkU $4 AUD
The frames of the Cx200 and cx450 appear to be the same in Australia. When compared to cx200 hard tail is US.
Any tips on mounting the motor?
[imghttps://i.imgur.com/SSAvaqG.jpg[/img]