Unicorn hub? Thruaxle 36H Disc Singlespeed?

Discussions related to motors other than hub motors.
This includes R/C motors, botttom bracket, roller and geared drives.
Post Reply
rg12   1 MW

1 MW
Posts: 1560
Joined: Jul 26 2014 4:22pm

Unicorn hub? Thruaxle 36H Disc Singlespeed?

Post by rg12 » Jan 24 2022 5:09pm

I want to run a singlespeed mid drive setup and was thinking of getting a hub that has threads on the sprocket side to put a brake disc adapter and then mount a large rear sprocket to this adapter.

What do you guys think?
Or do you have a simpler solution for me?

User avatar
Chalo   100 GW

100 GW
Posts: 10403
Joined: Apr 29 2009 11:29pm
Location: Austin, Texas

Re: Unicorn hub? Thruaxle 36H Disc Singlespeed?

Post by Chalo » Jan 24 2022 5:38pm

You solicit a lot of solutions from this community.
This is to express my gratitude to Justin of Grin Technologies for his extraordinary measures to save this forum for the benefit of all.

rg12   1 MW

1 MW
Posts: 1560
Joined: Jul 26 2014 4:22pm

Re: Unicorn hub? Thruaxle 36H Disc Singlespeed?

Post by rg12 » Jan 24 2022 5:42pm

Chalo wrote:
Jan 24 2022 5:38pm
You solicit a lot of solutions from this community without ever offering anything.
I didn't know there's a rule that says I have a limit to asking questions without providing enough for you Mr. Chalo in return.

What do you want man, money? too bored?

Please don't reply to my threads from now on, thank you.

EDIT: You edited your message, nice...thanks for crapping on my post

User avatar
Chalo   100 GW

100 GW
Posts: 10403
Joined: Apr 29 2009 11:29pm
Location: Austin, Texas

Re: Unicorn hub? Thruaxle 36H Disc Singlespeed?

Post by Chalo » Jan 24 2022 5:55pm

It wouldn't hurt for you to answer a few questions for others while you're trying to get us to solve your development issues for free.
This is to express my gratitude to Justin of Grin Technologies for his extraordinary measures to save this forum for the benefit of all.

rg12   1 MW

1 MW
Posts: 1560
Joined: Jul 26 2014 4:22pm

Re: Unicorn hub? Thruaxle 36H Disc Singlespeed?

Post by rg12 » Jan 24 2022 6:07pm

Chalo wrote:
Jan 24 2022 5:55pm
It wouldn't hurt for you to answer a few questions for others while you're trying to get us to solve your development issues for free.
I'm sorry, did I sign a contract that says that I owe anybody anything?
Is this some kind of a scam? offering free help and then demanding things in return?
Not everyone has time to answer questions here all day, I barely ever post here and when I do I barely have time to reply to my own threads.

Sounds like you are too bored harassing busy people wasting their time with this bs.
So yeah, I get rich off of everyone's ideas and I give them nothing in return ha!!

Get a life bro.

User avatar
Chalo   100 GW

100 GW
Posts: 10403
Joined: Apr 29 2009 11:29pm
Location: Austin, Texas

Re: Unicorn hub? Thruaxle 36H Disc Singlespeed?

Post by Chalo » Jan 24 2022 7:18pm

Characteristic
This is to express my gratitude to Justin of Grin Technologies for his extraordinary measures to save this forum for the benefit of all.

User avatar
amberwolf   100 GW

100 GW
Posts: 33684
Joined: Aug 17 2009 6:43am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group
Contact:

Re: Unicorn hub? Thruaxle 36H Disc Singlespeed?

Post by amberwolf » Jan 24 2022 7:56pm

rg12 wrote:
Jan 24 2022 6:07pm

I barely ever post here
Sorry to butt in, as I have no opinion on the present discussion, but would like to point out the above statement isn't really true, with 1500+ posts over a few years (recently, posting every few days):
search.php?author_id=39029&sr=posts
If you found this advice helpful, supporting contributions are accepted here.

Beginning of a New Life


Give a listen to my music!

(More here, including experimental)
.

User avatar
E-HP   1.21 GW

1.21 GW
Posts: 3726
Joined: Nov 01 2018 9:20pm

Re: Unicorn hub? Thruaxle 36H Disc Singlespeed?

Post by E-HP » Jan 24 2022 8:51pm

amberwolf wrote:
Jan 24 2022 7:56pm
rg12 wrote:
Jan 24 2022 6:07pm

I barely ever post here
Sorry to butt in, as I have no opinion on the present discussion, but would like to point out the above statement isn't really true, with 1500+ posts over a few years (recently, posting every few days):
search.php?author_id=39029&sr=posts
These things aren't rules, but some unwritten principles. As with most forums, there's generally a give and take for regular/long term (community) members, and generally just a take for the one off questions from newbies, but always nice if they post the resolution of their problem, which effectively is giving back.

The other categories I see are the folks that have some business or product idea that are generally coming here for data mining, with the possible return to the community through a new product that people might need in the future (haven't seen one fully fleshed out yet though), or to gather knowledge to support their own business. That's usually just a take, no giving back.

I've gotten a lot more from reading posts than I have from asking questions, but still feel obliged to contribute when I can. That doesn't mean everyone should feel obligated, unless the principles are something they can align with.

manray   1 mW

1 mW
Posts: 16
Joined: Aug 08 2021 12:11pm

Re: Unicorn hub? Thruaxle 36H Disc Singlespeed?

Post by manray » Jan 25 2022 4:39am

rg12 wrote:
Jan 24 2022 5:09pm
I want to run a singlespeed mid drive setup and was thinking of getting a hub that has threads on the sprocket side to put a brake disc adapter and then mount a large rear sprocket to this adapter.

What do you guys think?
Or do you have a simpler solution for me?
You can get a Pinion 104 bcd spider which fits any single speed hub that uses a Shimano freehub body (preferably steel or titanium).

You can then attach any 104 BCD chainring to create the rear single speed cog you want.

https://www.bikeman.com/PIN-P8200.html

rg12   1 MW

1 MW
Posts: 1560
Joined: Jul 26 2014 4:22pm

Re: Unicorn hub? Thruaxle 36H Disc Singlespeed?

Post by rg12 » Jan 25 2022 6:23am

E-HP wrote:
Jan 24 2022 8:51pm
amberwolf wrote:
Jan 24 2022 7:56pm
rg12 wrote:
Jan 24 2022 6:07pm

I barely ever post here
Sorry to butt in, as I have no opinion on the present discussion, but would like to point out the above statement isn't really true, with 1500+ posts over a few years (recently, posting every few days):
search.php?author_id=39029&sr=posts
These things aren't rules, but some unwritten principles. As with most forums, there's generally a give and take for regular/long term (community) members, and generally just a take for the one off questions from newbies, but always nice if they post the resolution of their problem, which effectively is giving back.

The other categories I see are the folks that have some business or product idea that are generally coming here for data mining, with the possible return to the community through a new product that people might need in the future (haven't seen one fully fleshed out yet though), or to gather knowledge to support their own business. That's usually just a take, no giving back.

I've gotten a lot more from reading posts than I have from asking questions, but still feel obliged to contribute when I can. That doesn't mean everyone should feel obligated, unless the principles are something they can align with.
I see your point but the fact that this Chalo dude is bothered by it personally to get into my profile and check on me makes him a typical prick.

Bare in mind that every help provided in reply to anyone's question is searchable in this board and also on google meaning that whenever someone is searching for a solution he may find my question and the below replies helpful.

Plus, whenever I share my trial and error asking for help I also contribute by providing my own feedback like my recent posts about the flipsky 75100 that I'm running with 24S li ion pack successfully while testing different firmwares and cooling solutions.

Bottom line, my personal time is limited and am working 24/7, so if everyone here thinks the same then that's cool, I won't be where I ain't welcome.
manray wrote:
Jan 25 2022 4:39am
rg12 wrote:
Jan 24 2022 5:09pm
I want to run a singlespeed mid drive setup and was thinking of getting a hub that has threads on the sprocket side to put a brake disc adapter and then mount a large rear sprocket to this adapter.

What do you guys think?
Or do you have a simpler solution for me?
You can get a Pinion 104 bcd spider which fits any single speed hub that uses a Shimano freehub body (preferably steel or titanium).

You can then attach any 104 BCD chainring to create the rear single speed cog you want.

https://www.bikeman.com/PIN-P8200.html
Thanks alot man! just what I was looking for :D

User avatar
E-HP   1.21 GW

1.21 GW
Posts: 3726
Joined: Nov 01 2018 9:20pm

Re: Unicorn hub? Thruaxle 36H Disc Singlespeed?

Post by E-HP » Jan 25 2022 10:46am

rg12 wrote:
Jan 25 2022 6:23am

I see your point but the fact that this Chalo dude is bothered by it personally to get into my profile and check on me makes him a typical prick.

Bare in mind that every help provided in reply to anyone's question is searchable in this board and also on google meaning that whenever someone is searching for a solution he may find my question and the below replies helpful.

Plus, whenever I share my trial and error asking for help I also contribute by providing my own feedback like my recent posts about the flipsky 75100 that I'm running with 24S li ion pack successfully while testing different firmwares and cooling solutions.

Bottom line, my personal time is limited and am working 24/7, so if everyone here thinks the same then that's cool, I won't be where I ain't welcome.
I think I've seen a couple of your posts. I don't have a problem with them. My pet peeves are the ones where it's obvious that the poster has not taken any self help steps (search/read the forum), provides no usable background or information to diagnose the issue, and become demanding like the forum owes them a response. Top it off with a double post or three. No rules against it, except maybe the multiple postings; but just rubs me the wrong way. Luckily the mods are much more patient, and seem to find a way to even help those folks. Maybe something in your posts triggered a similar reaction from Chalo.

rg12   1 MW

1 MW
Posts: 1560
Joined: Jul 26 2014 4:22pm

Re: Unicorn hub? Thruaxle 36H Disc Singlespeed?

Post by rg12 » Jan 25 2022 5:00pm

E-HP wrote:
Jan 25 2022 10:46am
rg12 wrote:
Jan 25 2022 6:23am

I see your point but the fact that this Chalo dude is bothered by it personally to get into my profile and check on me makes him a typical prick.

Bare in mind that every help provided in reply to anyone's question is searchable in this board and also on google meaning that whenever someone is searching for a solution he may find my question and the below replies helpful.

Plus, whenever I share my trial and error asking for help I also contribute by providing my own feedback like my recent posts about the flipsky 75100 that I'm running with 24S li ion pack successfully while testing different firmwares and cooling solutions.

Bottom line, my personal time is limited and am working 24/7, so if everyone here thinks the same then that's cool, I won't be where I ain't welcome.
I think I've seen a couple of your posts. I don't have a problem with them. My pet peeves are the ones where it's obvious that the poster has not taken any self help steps (search/read the forum), provides no usable background or information to diagnose the issue, and become demanding like the forum owes them a response. Top it off with a double post or three. No rules against it, except maybe the multiple postings; but just rubs me the wrong way. Luckily the mods are much more patient, and seem to find a way to even help those folks. Maybe something in your posts triggered a similar reaction from Chalo.
When the hell did I talk like anybody owes me something? no usable background to diagnose the issue? should I really give examples? nah won't go down to this level to justify myself, sorry, am not anyone's bi*tch having to prove myself to random people on the internet.

It's funny that nobody ever complained and suddenly mr. bored a$$ chalo bothers to go into my post activity in my profile and does a "background" check on me like he owns the place just because he's such a brown nose type of dude kissing moderators a$$ on an internet forum just to feel liked by someone.
and now everyone jumps in because there's a party so here you guys are, loving to point at someone for the sake of feeling good with yourselves.

I bet nobody here really cares that I don't put as much time as you guys into helping people but just enjoy bashing on someone out of boredom.

Am back to the life I have.

User avatar
E-HP   1.21 GW

1.21 GW
Posts: 3726
Joined: Nov 01 2018 9:20pm

Re: Unicorn hub? Thruaxle 36H Disc Singlespeed?

Post by E-HP » Jan 25 2022 7:10pm

rg12 wrote:
Jan 25 2022 5:00pm
E-HP wrote:
Jan 25 2022 10:46am
rg12 wrote:
Jan 25 2022 6:23am

I see your point but the fact that this Chalo dude is bothered by it personally to get into my profile and check on me makes him a typical prick.

Bare in mind that every help provided in reply to anyone's question is searchable in this board and also on google meaning that whenever someone is searching for a solution he may find my question and the below replies helpful.

Plus, whenever I share my trial and error asking for help I also contribute by providing my own feedback like my recent posts about the flipsky 75100 that I'm running with 24S li ion pack successfully while testing different firmwares and cooling solutions.

Bottom line, my personal time is limited and am working 24/7, so if everyone here thinks the same then that's cool, I won't be where I ain't welcome.
I think I've seen a couple of your posts. I don't have a problem with them. My pet peeves are the ones where it's obvious that the poster has not taken any self help steps (search/read the forum), provides no usable background or information to diagnose the issue, and become demanding like the forum owes them a response. Top it off with a double post or three. No rules against it, except maybe the multiple postings; but just rubs me the wrong way. Luckily the mods are much more patient, and seem to find a way to even help those folks. Maybe something in your posts triggered a similar reaction from Chalo.
When the hell did I talk like anybody owes me something? no usable background to diagnose the issue? should I really give examples? nah won't go down to this level to justify myself, sorry, am not anyone's bi*tch having to prove myself to random people on the internet.
I guess I should have created a new paragraph. The first two sentence apply to you, not the rest. Does that clear thing up?

rg12   1 MW

1 MW
Posts: 1560
Joined: Jul 26 2014 4:22pm

Re: Unicorn hub? Thruaxle 36H Disc Singlespeed?

Post by rg12 » Jan 25 2022 7:22pm

E-HP wrote:
Jan 25 2022 7:10pm
rg12 wrote:
Jan 25 2022 5:00pm
E-HP wrote:
Jan 25 2022 10:46am
rg12 wrote:
Jan 25 2022 6:23am

I see your point but the fact that this Chalo dude is bothered by it personally to get into my profile and check on me makes him a typical prick.

Bare in mind that every help provided in reply to anyone's question is searchable in this board and also on google meaning that whenever someone is searching for a solution he may find my question and the below replies helpful.

Plus, whenever I share my trial and error asking for help I also contribute by providing my own feedback like my recent posts about the flipsky 75100 that I'm running with 24S li ion pack successfully while testing different firmwares and cooling solutions.

Bottom line, my personal time is limited and am working 24/7, so if everyone here thinks the same then that's cool, I won't be where I ain't welcome.
I think I've seen a couple of your posts. I don't have a problem with them. My pet peeves are the ones where it's obvious that the poster has not taken any self help steps (search/read the forum), provides no usable background or information to diagnose the issue, and become demanding like the forum owes them a response. Top it off with a double post or three. No rules against it, except maybe the multiple postings; but just rubs me the wrong way. Luckily the mods are much more patient, and seem to find a way to even help those folks. Maybe something in your posts triggered a similar reaction from Chalo.
When the hell did I talk like anybody owes me something? no usable background to diagnose the issue? should I really give examples? nah won't go down to this level to justify myself, sorry, am not anyone's bi*tch having to prove myself to random people on the internet.
I guess I should have created a new paragraph. The first two sentence apply to you, not the rest. Does that clear thing up?
Yep

Post Reply