88nightrider
1 µW
- Joined
- Aug 9, 2022
- Messages
- 1
Hello all.
I have a fatbike/snowbike with a Bafang M400 G330.250.
26" tires 4,8" wide. Running only 15 PSI.
The controller is damaged.
Bought the bike used with these problems.
Some of the problems are: Walk mode does not work (can activate, and the display says 2,5km/h while standing still), does not deliver max power, delivers "all" of its power no matter how hard I peddal and pulls for about 1 second after I stop peddaling.
Our theory is that the controller was owerloaded. Quite a bit more load on the engine with these tires...
So my question is: What external controller would work to set up for this engine?
Preferably with torque sensor connection.
Thank you
- Yngve
I have a fatbike/snowbike with a Bafang M400 G330.250.
26" tires 4,8" wide. Running only 15 PSI.
The controller is damaged.
Bought the bike used with these problems.
Some of the problems are: Walk mode does not work (can activate, and the display says 2,5km/h while standing still), does not deliver max power, delivers "all" of its power no matter how hard I peddal and pulls for about 1 second after I stop peddaling.
Our theory is that the controller was owerloaded. Quite a bit more load on the engine with these tires...
So my question is: What external controller would work to set up for this engine?
Preferably with torque sensor connection.
Thank you
- Yngve