StinkyGoalieGuy
100 W
- Joined
- Apr 23, 2008
- Messages
- 298
From our great contributors Eric of Luna Cycle and Karl at electricbike-blog, it seems the BBSHD should run with an external controller fairly reliably at 40amps. I know some folks will say just get a Cyclone 3000, but the BBSHD vs. Cyclone 3000 is a whole different conversation. Please humor me and allow me to waste my money on this experiment. For reference, here are two great sources of running the BBSHD on an external controller:
https://electricbike-blog.com/2016/03/01/my-bbshd-was-evil-and-it-deserved-to-die-a-horrible-death/
https://www.electricbike.com/project-x-building-the-baddest-and-fastest-3000w-bbshd-ebike-ever/
I already have a BBS02. I can upgrade just the motor and controller to the BBSHD for just $500 at Luna.
They also sell just the Cyclone controller for $50, and I already have a Cyclone throttle from another Cyclone kit. This controller is already conveniently tuned for 40amps
Can anyone help me out with the phase and hall wire connection?
Using this image from electricbike blog:
Karl mentions in his post:
Lyen Controller -> BBSHD Motor:
HALL:
Yellow -> Grey
Green -> White
Blue -> Purple
PHASE:
Yellow -> Yellow
Green -> Blue
Blue -> Green
I'm guessing the green, yellow, and purple Anderson connectors are the phase wires?
Any guesses as to which are the hall wires in the above picture?
Any idea where are the hall and phase wires in the Cyclone controller:
Thanks in advance!
** update 10/10/16 ** - I got it working. Jump down on this page for the details.
https://electricbike-blog.com/2016/03/01/my-bbshd-was-evil-and-it-deserved-to-die-a-horrible-death/
https://www.electricbike.com/project-x-building-the-baddest-and-fastest-3000w-bbshd-ebike-ever/
I already have a BBS02. I can upgrade just the motor and controller to the BBSHD for just $500 at Luna.
They also sell just the Cyclone controller for $50, and I already have a Cyclone throttle from another Cyclone kit. This controller is already conveniently tuned for 40amps
Can anyone help me out with the phase and hall wire connection?
Using this image from electricbike blog:
Karl mentions in his post:
Lyen Controller -> BBSHD Motor:
HALL:
Yellow -> Grey
Green -> White
Blue -> Purple
PHASE:
Yellow -> Yellow
Green -> Blue
Blue -> Green
I'm guessing the green, yellow, and purple Anderson connectors are the phase wires?
Any guesses as to which are the hall wires in the above picture?
Any idea where are the hall and phase wires in the Cyclone controller:
Thanks in advance!
** update 10/10/16 ** - I got it working. Jump down on this page for the details.